🚀 go-pugleaf

Hi:
I hesitate to send this because I am a non expert, and certainly have no
ideas about fixes.  There might be nothing wrong that cannot be fixed by
digging deeper than I have managed to get into
the READMEs and documentation.  Let me know if you can point me in the 
right direction.

I did detect an interest in such problems in README-bugs and I am
anxious(desperate) for a good C++ compiler, so here goes.

I am trying to install gcc-2.1.tar.Z (obtained today from alfred.carleton.ca)
on a Data General AViiON 310 running DGUX5.4.0 .  (5.4.1 should be in
the mail).  This is supposed to be SVR4 compliant.  It uses gcc 1.37 as
its C compiler.

I uncompressed and untarred gcc into its own directory gcc-2.1 and
within this directory I did the following from within the c shell:

eval `sde-target m88kbcs`
./configure m88k-dgux
make LANGUAGES=c
make stage1
make CC=stage1/gcc CFLAGS="-g -O -Bstage1/"
make stage2
make CC=stage2/gcc CFLAGS="-g -O -Bstage2/"    **************
sh
$  for file in *.o; do
>  cmp $file stage2/$file
>           done

The output from the final lines starting with the trailing parts of the
make with the *********'s appended is as follows:

        (cd tmpcopy; ar rc ../tmplibgcc.a *.o)
        rm -rf tmpcopy
        if [ -f /usr/bin/ranlib -o -f /bin/ranlib ] ; then ranlib
tmplibgcc.a; e
lse true; fi
        mv tmplibgcc.a libgcc.a
        cp ./enquire.c . > /dev/null 2>&1
*** Error code 2 (ignored)
        ./gcc  -D_M88KBCS_TARGET  -g -O -Bstage2/ -B./    -DNO_SC
-DNO_MEM -DNO_
STDDEF -O0 -I. -c enquire.c
./gcc: file path prefix `stage2/' never used
        ./gcc  -D_M88KBCS_TARGET  -g -O -Bstage2/ -B./ -I. -I.
-I./config -DCRT_
BEGIN \
          -finhibit-size-directive -g0 -c ./crtstuff.c -o crtbegin.o
./gcc: file path prefix `stage2/' never used
        ./gcc  -D_M88KBCS_TARGET  -g -O -Bstage2/ -B./ -I. -I.
-I./config -DCRT_
END \
          -finhibit-size-directive -g0 -c ./crtstuff.c -o crtend.o
./gcc: file path prefix `stage2/' never used
        ./gcc  -D_M88KBCS_TARGET  -g -O -Bstage2/ -B./  enquire.o -o
enquire
./gcc: file path prefix `stage2/' never used
        ./enquire -f > tmp-float.h
*** Error code 4 (ignored)
        mv tmp-float.h float.h
GRGS-65% sh
$  for file in *.o; do
>  cmp $file stage2/$file
>           done
aux-output.o stage2/aux-output.o differ: char 7, line 1
c-aux-info.o stage2/c-aux-info.o differ: char 7, line 1
c-common.o stage2/c-common.o differ: char 7, line 1
c-convert.o stage2/c-convert.o differ: char 7, line 1
c-decl.o stage2/c-decl.o differ: char 7, line 1
c-lang.o stage2/c-lang.o differ: char 7, line 1
c-lex.o stage2/c-lex.o differ: char 7, line 1
c-parse.o stage2/c-parse.o differ: char 7, line 1
c-typeck.o stage2/c-typeck.o differ: char 7, line 1
caller-save.o stage2/caller-save.o differ: char 7, line 1
calls.o stage2/calls.o differ: char 7, line 1
cccp.o stage2/cccp.o differ: char 7, line 1
cexp.o stage2/cexp.o differ: char 7, line 1
combine.o stage2/combine.o differ: char 7, line 1
cp-call.o stage2/cp-call.o differ: char 6, line 1
cp-class.o stage2/cp-class.o differ: char 6, line 1
cp-cvt.o stage2/cp-cvt.o differ: char 6, line 1
cp-decl.o stage2/cp-decl.o differ: char 6, line 1
cp-decl2.o stage2/cp-decl2.o differ: char 6, line 1
cp-edsel.o stage2/cp-edsel.o differ: char 6, line 1
cp-except.o stage2/cp-except.o differ: char 6, line 1
cp-expr.o stage2/cp-expr.o differ: char 6, line 1
cp-gc.o stage2/cp-gc.o differ: char 6, line 1
cp-init.o stage2/cp-init.o differ: char 6, line 1
cp-lex.o stage2/cp-lex.o differ: char 6, line 1
cp-method.o stage2/cp-method.o differ: char 6, line 1
cp-parse.o stage2/cp-parse.o differ: char 6, line 1
cp-pt.o stage2/cp-pt.o differ: char 6, line 1
cp-ptree.o stage2/cp-ptree.o differ: char 6, line 1
cp-search.o stage2/cp-search.o differ: char 6, line 1
cp-spew.o stage2/cp-spew.o differ: char 6, line 1
cp-tree.o stage2/cp-tree.o differ: char 6, line 1
cp-type2.o stage2/cp-type2.o differ: char 6, line 1
cp-typeck.o stage2/cp-typeck.o differ: char 6, line 1
cp-xref.o stage2/cp-xref.o differ: char 6, line 1
crtbegin.o stage2/crtbegin.o differ: char 6, line 1
crtend.o stage2/crtend.o differ: char 6, line 1
cse.o stage2/cse.o differ: char 7, line 1
dbxout.o stage2/dbxout.o differ: char 7, line 1
dwarfout.o stage2/dwarfout.o differ: char 7, line 1
emit-rtl.o stage2/emit-rtl.o differ: char 7, line 1
enquire.o stage2/enquire.o differ: char 6, line 1
explow.o stage2/explow.o differ: char 7, line 1
expmed.o stage2/expmed.o differ: char 7, line 1
expr.o stage2/expr.o differ: char 7, line 1
final.o stage2/final.o differ: char 7, line 1
flow.o stage2/flow.o differ: char 7, line 1
fold-const.o stage2/fold-const.o differ: char 7, line 1
function.o stage2/function.o differ: char 7, line 1
gcc.o stage2/gcc.o differ: char 6, line 1
genattr.o stage2/genattr.o differ: char 7, line 1
genattrtab.o stage2/genattrtab.o differ: char 7, line 1
gencodes.o stage2/gencodes.o differ: char 7, line 1
genconfig.o stage2/genconfig.o differ: char 7, line 1
genemit.o stage2/genemit.o differ: char 7, line 1
genextract.o stage2/genextract.o differ: char 7, line 1
genflags.o stage2/genflags.o differ: char 7, line 1
genoutput.o stage2/genoutput.o differ: char 7, line 1
genpeep.o stage2/genpeep.o differ: char 7, line 1
genrecog.o stage2/genrecog.o differ: char 7, line 1
getopt.o stage2/getopt.o differ: char 6, line 1
getopt1.o stage2/getopt1.o differ: char 6, line 1
getpwd.o stage2/getpwd.o differ: char 7, line 1
global-alloc.o stage2/global-alloc.o differ: char 7, line 1
insn-attrtab.o stage2/insn-attrtab.o differ: char 7, line 1
insn-emit.o stage2/insn-emit.o differ: char 7, line 1
insn-extract.o stage2/insn-extract.o differ: char 7, line 1
insn-output.o stage2/insn-output.o differ: char 7, line 1
insn-peep.o stage2/insn-peep.o differ: char 7, line 1
insn-recog.o stage2/insn-recog.o differ: char 7, line 1
integrate.o stage2/integrate.o differ: char 7, line 1
jump.o stage2/jump.o differ: char 7, line 1
local-alloc.o stage2/local-alloc.o differ: char 7, line 1
loop.o stage2/loop.o differ: char 7, line 1
objc-actions.o stage2/objc-actions.o differ: char 6, line 1
objc-parse.o stage2/objc-parse.o differ: char 6, line 1
obstack.o stage2/obstack.o differ: char 7, line 1
optabs.o stage2/optabs.o differ: char 7, line 1
print-rtl.o stage2/print-rtl.o differ: char 7, line 1
print-tree.o stage2/print-tree.o differ: char 7, line 1
protoize.o stage2/protoize.o differ: char 6, line 1
recog.o stage2/recog.o differ: char 7, line 1
reg-stack.o stage2/reg-stack.o differ: char 7, line 1
regclass.o stage2/regclass.o differ: char 7, line 1
reload.o stage2/reload.o differ: char 7, line 1
reload1.o stage2/reload1.o differ: char 7, line 1
reorg.o stage2/reorg.o differ: char 7, line 1
rtl.o stage2/rtl.o differ: char 7, line 1
rtlanal.o stage2/rtlanal.o differ: char 7, line 1
sched.o stage2/sched.o differ: char 7, line 1
sdbout.o stage2/sdbout.o differ: char 7, line 1
stmt.o stage2/stmt.o differ: char 7, line 1
stor-layout.o stage2/stor-layout.o differ: char 7, line 1
stupid.o stage2/stupid.o differ: char 7, line 1
toplev.o stage2/toplev.o differ: char 7, line 1
tree.o stage2/tree.o differ: char 7, line 1
unprotoize.o stage2/unprotoize.o differ: char 6, line 1
unroll.o stage2/unroll.o differ: char 7, line 1
varasm.o stage2/varasm.o differ: char 7, line 1
version.o stage2/version.o differ: char 7, line 1
xcoffout.o stage2/xcoffout.o differ: char 7, line 1
$              (^D to move mack to c-shell)
GRGS-66%

  There were no other suspicious parts (to my eye) from the make
output.
##################################################
in the process of the install i.e.:
  make CC=stage2/gcc install

the following lines appear:

        cp ./byteorder.h .
cp: ./byteorder.h and ./byteorder.h are identical
*** Error code 2 (ignored)

which do not worry me much (should they?)

###################################################
when I try to compile a program (which I wrote so it could be horrible,
but it compiles and runs fine under gcc 1.37 as delivered with the
AViiON and other C compilers), I get the following error:

 symbol                             in file
___iob                              felinprp.o
ld fatal: Symbol referencing errors. No output written to a.out

I do not reference anything called iob.  A grep -i iob *   comes up
empty.

#####################################################
The above is essentially the same as my attempts 2 weeks ago with
gcc-2.0.

Questions:
1. Does thie above mean anything to you?
2. Have I done the right steps?
3. Is there anything else I can try?

I would be happy to put some effort into this to help, but remember I am
somewhat of a neophyte here, and it takes 1 hour or more to do a make.

Any help advice or even an acknowledgement of this mail will be greatly
appreciated.

Thank you and gnu for all the good things that are out there for us.
 
Dave Greenberg
-- 
_______________________________________________________________________
|David A. Greenberg                    email dgreenbe@sable.bio.dfo.ca|
|Bedford Institute of Oceanography     OMNET c/o J.LODER              | 
|P.O. Box 1006                         phone (902) 426-2431           | 
|Dartmouth, Nova Scotia                fax   (902) 426-7827           | 
|CANADA B2Y-4A2                        home  (902) 865-7511           |
_______________________________________________________________________