gcc on Pentium running Novell UNIXWare

Article View: gnu.gcc.help

Article #41767

#41767

From: Steve Trine
Date: Fri, 16 Feb 1996 00:00

19 lines
1284 bytes

After receiving some input to the original problem statement [Need to run gcc
on Pentium PC running Novell UnixWare 2.01], I built gcc allowing configure to
set the parameters (i386-univel-sysv4.2MP).  This apparently built OK and works.

A suggestion was also sent by Ronald F. Guilmette <rfg@monkeys.com> to use the
system parameter i586-sysv4  or  i586-unixware.  Neither was attempted.

Thanks to Vinnie Shelton <shelton@ICD.Teradyne.COM> and Curtis Wong
<curtis@crl.com> for the timely responses.

Regards,
Steve

=======================================================================
Steve Trine             Internet mail : strine@hpmail2.ftw.mot.com
Motorola                Phone : (817) 245-6466
[standard spokesmanship disclaimer]
=======================================================================

Technical Details

Message-ID: <4g2elv$c0p@fwsns06.fwrdc.rtsg.mot.com>

Path: arc1-ca.pugleaf.net!unknown!not-for-mail

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 11318c,ef39ebec6a85f6e5,start
X-Google-Attributes: gid11318c,public
From: strine@fwrdc.rtsg.mot.com (Steve Trine)
Subject: gcc on Pentium running Novell UNIXWare
Date: 1996/02/16
Message-ID: <4g2elv$c0p@fwsns06.fwrdc.rtsg.mot.com>
X-Deja-AN: 139638478
organization: Motorola Research and Development Center, Fort Worth, TX
keywords: Novell Pentium UNIXWare
newsgroups: gnu.gcc.help