Article View: gnu.gcc.help
Article #49902PIC code with gas
From: Paul T. Marquis
Date: Fri, 03 Dec 1993 19:39
Date: Fri, 03 Dec 1993 19:39
15 lines
1264 bytes
1264 bytes
I have just installed gcc 2.5.5 on a SPARC 10, using gas 2.2 and gnu-ld 2.2, and have a problem assembling code with gas that has been compiled using position independent code (-fPIC). The assembler first comes back with an unrecognized option (-k), but I believe this is because the assembler for the 386i required the -k option for position independent code. I then get something like the following error: Error: Attempt to get value of unresolved symbol L0 The assembly code generated by gcc assembles fine using as. Any ideas? Thanks for your help. -- Paul, the Edge, Marquis pmarquis@iddis.com
Technical Details
Message-ID:
<IDDPTM.93Dec3143900@iddss1.iddis.com>Path:
arc1-ca.pugleaf.net!gmd.de!newsserver.jvnc.net!howland.reston.ans.net!usenet.ins.cwru.edu!nigel.msen.com!math.fu-berlin.de!news.fu-berlin.de!iddptmShow Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: 11318c,3be9dffdfd2446d7,start X-Google-Attributes: gid11318c,public X-Google-ArrivalTime: 1993-12-03 12:27:23 PST Newsgroups: gnu.gcc.help Path: arc1-ca.pugleaf.net!gmd.de!newsserver.jvnc.net!howland.reston.ans.net!usenet.ins.cwru.edu!nigel.msen.com!math.fu-berlin.de!news.fu-berlin.de!iddptm From: iddptm@iddss1.iddis.com (Paul T. Marquis) Subject: PIC code with gas Message-ID: <IDDPTM.93Dec3143900@iddss1.iddis.com> Sender: news@math.fu-berlin.de (Math Department) Nntp-Posting-Host: iddss1.iddis.com Organization: I.D.D. Informations Services Date: Fri, 3 Dec 1993 19:39:00 GMT Lines: 15