Article View: gnu.gcc.help
Article #50481GCC with debugging on HPUX...
From: Jason R. Thorpe
Date: Fri, 24 Sep 1993 20:44
Date: Fri, 24 Sep 1993 20:44
20 lines
1609 bytes
1609 bytes
Hello... I would like some advice... I have compiled the Utah port of the GNU assembler (old verison, like 1.39 or something...) and the Utah port of gcc 2.4.5 so that I can use the -g option on the PA-RISC. (HPPA 1.0 - HP 9000/845 running HPUX 8.01). Now, I would like to build the GNU assmbler on our HP 9000/433 machines (68040) and build the Utah gcc with debugging. But I have a problem. I tried to compile the Utah gas without success...I configured it for HPUX 68020 and the compiler blew chunks...And when using the GNU gas, there is no configuration for HPUX 68040 (HPUX 9.01). Any ideas, folks? Later... -- ------------------------------------------------------------------------------ Jason R. Thorpe | | 434 Weatherford Hall OSU Computer Science | thorpej@xanth.cs.orst.edu | Corvallis, OR 97331 Support Staff | | (503) 737-9533
Technical Details
Message-ID:
<27vm71INN1uu@flop.ENGR.ORST.EDU>Path:
arc1-ca.pugleaf.net!gmd.de!newsserver.jvnc.net!howland.reston.ans.net!europa.eng.gtefsd.com!uunet!sequent!gaia.ucs.orst.edu!flop.ENGR.ORST.EDU!xanth.CS.ORST.EDU!thorpejShow Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: 11318c,99379d9c6cc037a2,start X-Google-Attributes: gid11318c,public X-Google-ArrivalTime: 1993-09-24 14:47:17 PST Path: arc1-ca.pugleaf.net!gmd.de!newsserver.jvnc.net!howland.reston.ans.net!europa.eng.gtefsd.com!uunet!sequent!gaia.ucs.orst.edu!flop.ENGR.ORST.EDU!xanth.CS.ORST.EDU!thorpej From: thorpej@xanth.CS.ORST.EDU (Jason R. Thorpe) Newsgroups: gnu.gcc.help Subject: GCC with debugging on HPUX... Date: 24 Sep 1993 20:44:17 GMT Organization: Computer Science Department, Oregon State University Lines: 20 Message-ID: <27vm71INN1uu@flop.ENGR.ORST.EDU> NNTP-Posting-Host: xanth.cs.orst.edu