🚀 go-pugleaf

Newsgroups: gnu.gcc.bug
Subject: Help with GCC 2.0 on HP 400's Running 8.0
Summary: 
Followup-To: 
Distribution: na
Organization: School of Electrical Engineering, Georgia Institute of Technology
Keywords: 


I'm having problems getting GCC compiled on my HP400's.  Two problems, really:

1) When I try to compile it the normal way, with debugging disabled, I use the
following:
#!/bin/sh
# GCC was configured as follows:
./configure m68k-hp-hpux

I've modified the makefile to attempt only c on the first pass... The compile
chugs along fine until it tries to build the second pass, and dies with the
following messages:

lots more stuff
...
	rm -f tmplibgcc2.a
	set -e; \
	for name in _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2  _lshrdi3 _lshldi3 _ashldi3 _ashrdi3   _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf  _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi  _varargs _eprintf _builtin_new _bu
iltin_New _builtin_del  _bb _shtab _clear_cache _trampoline __main _exit; \
	do \
	  echo ${name}; \
	  ./gcc -fstrength-reduce -O -I. -I. -I./config \
	      -O2     -B./  -c -DL${name} \
	      ./libgcc2.c -o ${name}.o; \
	  if [ $? -eq 0 ] ; then true; else exit 1; fi; \
	  ar rc tmplibgcc2.a ${name}.o; \
	  rm -f ${name}.o; \
	done
_muldi3
/usr/tmp/cca22886.s:1:"Unknown operator" -- Statement 'version 3' ignored
/usr/tmp/cca22886.s:2:"Unknown operator" -- Statement 'text' ignored
/usr/tmp/cca22886.s:3:"Unknown operator" -- Statement 'lalign 2' ignored
/usr/tmp/cca22886.s:4:"Unknown operator" -- Statement 'global ___muldi3' ignored
/usr/tmp/cca22886.s:6:"Unknown operator" -- Statement 'link.w %a6,&-8' ignored
/usr/tmp/cca22886.s:7:"Unknown operator" -- Statement 'movm.l &0x3f00,-(%sp)' ignored
/usr/tmp/cca22886.s:8:"Unknown operator" -- Statement 'mov.l 8(%fp),-8(%fp)' ignored
/usr/tmp/cca22886.s:9:"Unknown operator" -- Statement 'mov.l 12(%fp),-4(%fp)' ignored
/usr/tmp/cca22886.s:10:"Unknown operator" -- Statement 'mov.l 16(%fp),%d5' ignored
/usr/tmp/cca22886.s:11:"Unknown operator" -- Statement 'mov.l 20(%fp),%d6' ignored
/usr/tmp/cca22886.s:12:"Unknown operator" -- Statement 'mov.l &65535,%d1' ignored
/usr/tmp/cca22886.s:13:"Unknown operator" -- Statement 'mov.l -4(%fp),%d2' ignored
...
lots more error messages of similar nature.

2) The second problem is that when I want to use the gnu tools to enable
debugging, I can't get hpxt to compile and run properly.  I get segmentation
violations in version 1.9 and 1.94 beta doesn't even have these tools any
more.


Any help would be appreciated.

Peter
-----------------------------------------------------------------------
		    Peter Flur, Research Engineer
	 School of EE, Georgia Tech, Atlanta, GA  30332-0250
	   E-MAIL: flur@ee.gatech.edu PHONE: (404) 853-9355
	 DUKE UNIVERSITY -- 1991 NCAA BASKETBALL CHAMPIONS!!!