🚀 go-pugleaf

In article <1991Nov4.211716.8930@csus.edu>, wittbj@cube05.csus.edu (brian witt) writes:
-> In article <392@ariadna.FibHaifa.com> ricky@FibHaifa.com (Ricardo Marek) writes:
-> >I have problems on installing GNU gcc 'C' compiler (ver. 1.39)
-> >on ULTRIX V4.2 (Rev.96), on a DEC-System 3100 (DEC-Station 3100
-> >without the video SIM module).
-> >
-> >The first-stage compiles O.K. but the second-stage fails, this
-> >are the error messages:
-> >	[SIG_IGN and SIG_DFL missing symbol error messages..]
-> 
-> OK, here is the deal.. You're probably using the latest Ultrix, right?
-> Felt a more POSIX like Ultrix would make you day happier...?
-> For Ultrix, probably for now on, the __vax__ symbol isn't used
-> in the Ultrix include files anymore.  Try -D__vax on the command
-> line.  Add to CCOPTS in the Makefile.

Ummm.... He says he is on a DEC-System 3100, Not a VAX-System 3100.
The DEC-??????? are RISC platforms. To compile it for the VAX platform
will do nothing but cause you endless grief.

I would suggest you get gcc 1.40 and configure it for a decstation,
and follow the INSTALL directions. It works well. Also, make sure
you don't have an old gcc and libs installed elsewhere. If they are
bad, this will cause you more endless grief. If they are installed,
when compiling the second run, the stage1/gcc will pick up the
gcc-cpp, gcc-gnulib, gcc-cc1, etc, from the installed location.


-- 

Steve.                    sfreed@ariel.unm.edu


In article <1991Nov4.211716.8930@csus.edu>, wittbj@cube05.csus.edu (brian witt) writes:
> In article <392@ariadna.FibHaifa.com> ricky@FibHaifa.com (Ricardo Marek) writes:
> >I have problems on installing GNU gcc 'C' compiler (ver. 1.39)
> >on ULTRIX V4.2 (Rev.96), on a DEC-System 3100 (DEC-Station 3100
> >without the video SIM module).
> >
> >The first-stage compiles O.K. but the second-stage fails, this
> >are the error messages:
> >	[SIG_IGN and SIG_DFL missing symbol error messages..]
> 
> OK, here is the deal.. You're probably using the latest Ultrix, right?
> Felt a more POSIX like Ultrix would make you day happier...?
> For Ultrix, probably for now on, the __vax__ symbol isn't used
> in the Ultrix include files anymore.  Try -D__vax on the command
> line.  Add to CCOPTS in the Makefile.  That will bring in the
> SIG_DFL and SIG_IGN constants.  The __vax__ is from the GNU GCC
> config files, somewhere.
> 
> Compilations will be just fine... we did this on our VAX 8610 cluster.
> 
> UNEXPECTED OPERATION ALERT:  
> 	This change should probably be folded into the GCC source code.
> 
> >
> >and nothing improves.. Any Hint? (Answers via e-mail, thanks).
> >-- 
> >    e-mail: ricky@fibronics.UUCP 
> 
> 
> -- 
>    Brian Witt     [Sac State Comp Science]   "Waldo, the pariot, is dead"
>    Internet:  wittbj@cube01.ccs.csus.edu               -- Agent Cooper
>                   #define  POSIX_ME_HARDER     1      <-- GNU

-- 

Steve.                    sfreed@ariel.unm.edu