🚀 go-pugleaf

In article <1992Nov10.142724.24992@jussieu.fr>, eranian@fructidor.ibp.fr (Stephane ERANIAN) writes:
> I am posting this news here, but I don't know if it is the right place.
> Anyway, I 'm having problem with gcc2.3.1 compilation on our RS6000 running
> AIX3.2
> I followed the steps described in the INSTALL file.
> % configure --target=rs6000-ibm-aix
> Everthing is OK . Then I just type
> % make LANGUAGES=c
> After I while ( rather half an hour !!), I got the fllowinfg message : 
>    .
>    .
>    .
>    if [ -f libgcc2.ready ] ; then \
>                         true; \
>                 else \
>                         touch libgcc2.ready; \
>                 fi
>         rm -f tmplibgcc2.a
>         set -e; \
>                 for name in _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2  _lshrdi3 _lshldi3
> _ashldi3 _ashrdi3   _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf  _fixunsdfsi
> _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi  __gcc_bcmp _varargs _eprintf _builtin_new
> _caps_New _builtin_del  _bb _shtab _clear_cache _trampoline __main _exit _ctors; \
>                 do \
>                   echo ${name}; \
>                   ./xgcc -B./ -O2  -DIN_GCC   -g  -g1 -I. -I. -I./config -c -DL${name} \
>                       ./libgcc2.c -o ${name}.o; \
>                   if [ $? -eq 0 ] ; then true; else exit 1; fi; \
>                   ar rc tmplibgcc2.a ${name}.o; \
>                   rm -f ${name}.o; \
>                 done
> _muldi3
> Assembler:
> /tmp/ccQ4wCzR.s: line 33: 1252-142 Syntax error.
> make: 1254-004 The error code from the last command is 1.
> 
> Make Quitting.
> 
> What's wrong, please help !!!!!
> 
> 
> 
I saw this behavior too.  Change the Makefile to compile things without
the -g and the -g1 debugging flags.  Then it will compile ok.

In article <1992Nov11.102327.60682@cc.usu.edu> edx@cc.usu.edu writes:
>In article <1992Nov10.142724.24992@jussieu.fr>, eranian@fructidor.ibp.fr (Stephane ERANIAN) writes:
 <stuff deleted>
>> _muldi3
>> Assembler:
>> /tmp/ccQ4wCzR.s: line 33: 1252-142 Syntax error.
>> make: 1254-004 The error code from the last command is 1.
>> 
>> Make Quitting.
>> 
>> What's wrong, please help !!!!!
>> 
>> 
>> 
>I saw this behavior too.  Change the Makefile to compile things without
>the -g and the -g1 debugging flags.  Then it will compile ok.
>

  You haven't fixed the problem, just hidden it for a while. You need to
get the fixed compiler. I built gcc-2.3.1 on AIX-3.1 and AIX-3.2 out of
the box.

  From the ./gcc-2.3.1/README.RS6000:

    Debugging code compiled with GCC on the RS/6000 requires that you
    upgrade the AIX assembler /bin/as with a replacement that is available
    from IBM.
    
    Any customer can order and get the replacement assembler, and install
    it on one or more machines.  It is distributed both on diskette and
    via VNET, for downloading via ftp.  VNET distribution may be desirable
    if you have a friendly IBM rep nearby with a networked VM machine.
    
    In either case, to order, execute
        lslpp -h bos.obj to determine your release level.  (Look on the
    ACTIVE line for something like 03.01.0005.0012.) Then call IBM Support
    at 800-237-5511.  Ask for emergency shipment of the rs6000 AIX fix for
    APAR IX26107.


    Cheers,

    Tom McConnell
-- 
 Tom McConnell          |     Internet: tmcconne@sedona.intel.com
 Intel, Corp. C3-91     |     Phone: (602)-554-8229
 5000 W. Chandler Blvd. | The opinions expressed are my own. No one in 
 Chandler, AZ  85226    | their right mind would claim them.

>>>>> On 11 Nov 92 10:23:27 MDT, edx@cc.usu.edu said:

 edx> In article <1992Nov10.142724.24992@jussieu.fr>, eranian@fructidor.ibp.fr (Stephane ERANIAN) writes:
> _muldi3
> Assembler:
> /tmp/ccQ4wCzR.s: line 33: 1252-142 Syntax error.
> make: 1254-004 The error code from the last command is 1.
> 
> Make Quitting.
> 
> What's wrong, please help !!!!!
> 
> 
> 
 edx> I saw this behavior too.  Change the Makefile to compile things without
 edx> the -g and the -g1 debugging flags.  Then it will compile ok.

You have the wrong assembler, the one that IBM normally supplies. Read
the file `README.RS6000' from the gcc distribution for detailed
instructions. It worked for me.

--
    /\            | eMail: man@magwien.gv.at (Andreas Manessinger)
   /  \ndreas     | pMail: Alserstra"se. 20/6; A-1090 Wien; Austria
  /\/\ \          | Work : Gemeinde Wien MD-ADV/Ma; Ref. EPS
 / /  \anessinger | Phone: +43 222 4039584/13, FAX: 4039584/18, Home: 9350434

Article 2353 (42 more) in gnu.gcc.help:
From: maheswar@eecs.ucdavie.edu (Kapilan Maheswaran)  
Newsgroups: gnu.gcc.help
Subject: RTL Instrumentation  
Keywords: GCC, RTL, Instrumentation  
Message-ID: 
Date: 18 Nov 92 12:28:18 GMT
Organization: University of California, Davis of EEC Dept
Lines: 75
Originator: maheswar@eecs.ucdavie.edu


Hello, 
I have been trying to intrument RTL code to get profile data(e.g.
block frequency) and I am not getting anywhere.  I want to use a probe
(a counter) in the RTL code and store the block counts in an array in RTL. 
Please help.