🚀 go-pugleaf

Sorry.  I cannot agree with it.

It make GDB not flexible.

Hui

On Fri, Nov 13, 2009 at 22:42, Alexandre Rusev <arusev@ru.mvista.com> wrote:
> teawater wrote:
>
> I think this is a hehavior of kernel.  I think change pc always a
> danger thing.  :)
>
>
> Yes, extremely dangeorous! ;)
> But GDB supports feature such as "call <func_name>", when using it the Joe
> user does not even cares the PC,
> he just thinks that he makes call to some function...
>
> Moreover the intent of changing stack by kernel is to make system call to
> restart.
> The kernel (in theory) could choose to not return to userland at this point
> (because of no signal handlers are set by the process)
> and restart syscall internally.
> If it where so, all the process could have been transparent for GDB.
>
> And this usecase is enounted quite often by users....:(
>
> Because the nature of the problem is quite clear, it could be (once "in
> theory") worked around both in kernel and in GDB.
>
> Because the GDB does a lot of tricks and serves to thecnical puroses may be
> it it the best place to implement workaround there?
>
> Yet from point of view of kernel that's the place where either nobody (even
> GDB) is supposed to intervien  the kernel internal
> housekeeping, at least till the next machine instruction is executed.
> So the kernel could either:
> [1] not enable the GDB/ptrace to stop process and change user registers at
> that point
> [2] remember the state of essential registers (PC, may be others likes FP)
> and revert all changes before executing the next instruction
> [3] remember the state of essential registers (PC, may be others likes FP)
> and if the process was stopped
>      and somebody (GDB/ptrace) changed PC before execution of the next
> instruction then kernel can avoid it's own changes of PC
>
>
> Anyway the problem exists and I'm trying at least to find out where needs to
> be fixed
>
> infrun: clear_proceed_status_thread (process 4542)
> infrun: proceed (addr=0xffffffff, signal=144, step=0)
> infrun: resume (step=0, signal=0), trap_expected=0
> infrun: wait_for_inferior (treat_exec_as_sigtrap=0)
> infrun: target_wait (-1, status) =
> infrun:   4542 [process 4542],
> infrun:   status->kind = stopped, signal = SIGINT
> infrun: infwait_normal_state
> infrun: TARGET_WAITKIND_STOPPED
> infrun: stop_pc = 0xb7fe3410
> infrun: random signal 2
>
> Program received signal SIGINT, Interrupt.
> infrun: stop_stepping
> 0xb7fe3410 in __kernel_vsyscall ()
> (gdb) disas
> Dump of assembler code for function __kernel_vsyscall:
>    0xb7fe3400 <+0>:	push   %ecx
>    0xb7fe3401 <+1>:	push   %edx
>    0xb7fe3402 <+2>:	push   %ebp
>    0xb7fe3403 <+3>:	mov    %esp,%ebp
>    0xb7fe3405 <+5>:	sysenter
>    0xb7fe3407 <+7>:	nop
>    0xb7fe3408 <+8>:	nop
>    0xb7fe3409 <+9>:	nop
>    0xb7fe340a <+10>:	nop
>    0xb7fe340b <+11>:	nop
>    0xb7fe340c <+12>:	nop
>    0xb7fe340d <+13>:	nop
>    0xb7fe340e <+14>:	jmp    0xb7fe3403 <__kernel_vsyscall+3>
> => 0xb7fe3410 <+16>:	pop    %ebp
>    0xb7fe3411 <+17>:	pop    %edx
>    0xb7fe3412 <+18>:	pop    %ecx
>    0xb7fe3413 <+19>:	ret
> End of assembler dump.
> (gdb) p $pc
> $1 = (void (*)()) 0xb7fe3410 <__kernel_vsyscall+16>
> (gdb) p $pc=0xb7fe3413
> $2 = (void (*)()) 0xb7fe3413 <__kernel_vsyscall+19>
> (gdb) si
> infrun: clear_proceed_status_thread (process 4542)
> infrun: proceed (addr=0xffffffff, signal=144, step=1)
> infrun: resume (step=1, signal=0), trap_expected=0
> infrun: wait_for_inferior (treat_exec_as_sigtrap=0)
> infrun: target_wait (-1, status) =
> infrun:   4542 [process 4542],
> infrun:   status->kind = stopped, signal = SIGTRAP
> infrun: infwait_normal_state
> infrun: TARGET_WAITKIND_STOPPED
> infrun: stop_pc = 0xb7fe3412
> infrun: stepi/nexti
> infrun: stop_stepping
> 0xb7fe3412 in __kernel_vsyscall ()
>
> Thanks,
> Hui
>
>
>
> On Nov 2, 7:27 pm, Alexandre Rusev <aru...@ru.mvista.com> wrote:
>
>
> teawater wrote:
>
>
> This signal ctrl-c will not really send to inferior.
>
>
> But the result is interrupted system call which is restarted then by kernel.
> And is user changes program counter in GDB at this point,
> then it takes place before the modification of PC is done by kernel.
> The result is that execution jumps neither to the point the user said in
> GDB nor
> to the point the kernel wishes it be due to restart the syscall.
>
> Is it incorrect behavior of GDB or incorrect behavior of kernel or
> something else???
>
>
>
> (gdb) help info handle
>
>
> On Oct 31, 12:10 am, Alexandre Rusev <aru...@ru.mvista.com> wrote:
>
>
> Hi.
>
>
> When the program at ht end of message debugged under GDB is stopped with
> Ctrl+C
> it's usually found in interrupted system call. (The same result is
> observed for x86 and PPC with kernels 2.6.18 and 2.6.28)
>
>
> (gdb) where
> #0  0xb7fe2424 in __kernel_vsyscall ()
> #1  0xb7f36ad0 in nanosleep () from /lib/libc.so.6
> #2  0xb7f3690e in sleep () from /lib/libc.so.6
> #3  0x08048600 in qqq () at testBT2.c:45
> #4  0x080487a5 in eee () at testBT2.c:73
> #5  0x0804846a in main () at testBT2.c:17
>
>
> The PC is pointing at the next instruction, accordingly to GDB.
> But the kernel tries to restart syscall by means of changing PC to PC-4
> (in case of PowerPC and to some other value for x86)
> and it does it's change to PC after the user continues execution of
> program in GDB with "cont" or "si" command.
>
>
> The issue is that if user changed PC at this point or uses "call
> <func_name>" GDB command, the both changes to PC
> are added (as kernel uses PC relative change i.e. PC - 4), and the
> program continues execution at absolutely wrong place.
>
>
> The issue may be gracefully observed if breakpoint is set just before
> <func_name> and then PC is changed to the <func_name> address.
> In such case the breakpoint is hit while it must not be.
>
>
> #include <stdio.h>
> #include <stdlib.h>
>
>
> void qqq();
> void www();
> void eee();
>
>
> void * xrealloc(void*, int);
>
>
> int main(void)
> {
>         eee();
>     return EXIT_SUCCESS;
>
>
> }
>
>
> void qqq() {
>     void *a[256];
>     size_t i, n;
>
>
>     for (i = 0; i < 256; i++)
>     {
>         n = (size_t) ((rand() * 256.0) / (RAND_MAX + 1.0)) + 1;
>         a[i] = malloc(n);
>     }
>     for (i = 256; i > 0; i--)
>     {
>         n = (size_t) ((rand() * 256.0) / (RAND_MAX + 1.0)) + 1;
>         a[i - 1] = xrealloc(a[i - 1], n);
>     }
>     sleep(1);
>     for (i = 0; i < 256; i += 2)
>         free(a[i]);
>     for (i = 256; i > 0; i -= 2)
>         free(a[i - 1]);
>     sleep(1);
>
>
> }
>
>
> void www() {
>     void *a[256];
>     size_t i, n;
>
>
>     for (i = 0; i < 256; i++)
>     {
>         n = (size_t) ((rand() * 256.0) / (RAND_MAX + 1.0)) + 1;
>         a[i] = malloc(n);
>     }
>     for (i = 256; i > 0; i--)
>     {
>         n = (size_t) ((rand() * 256.0) / (RAND_MAX + 1.0)) + 1;
>         a[i - 1] = realloc(a[i - 1], n);
>     }
>     sleep(1);
>     for (i = 0; i < 256; i += 2)
>         free(a[i]);
>     for (i = 256; i > 0; i -= 2)
>         free(a[i - 1]);
>     sleep(1);
>
>
> }
>
>
> void eee() {
>
>
>         while (1) {
>                 qqq();
>
>
>                 www();
>
>
>         }
>
>
> }
>
>
> void * xrealloc(void* addr, int n) {
>         return realloc(addr, n);
>
>
> }
>
>
> _______________________________________________
> bug-gdb mailing list
> bug-...@gnu.org
> http://lists.gnu.org/mailman/listinfo/bug-gdb
>
>
>
>