🚀 go-pugleaf

Hello!

The problem: I cannot get gdb to remotely debug a program on another machine.

The players: gdb 5.1.1, configured as i386-pc-solaris2.7

The situation: The host and target machines are both Intel boxes running
	Solaris 2.7.  I have implemented the needed routines in the
	i386-stub.c file, and the two machines do talk correctly with
	each other across the serial line.

	I link the stub into my program and boot it on the target machine;
	the first thing it does after calling set_debug_traps() is to call
	breakpoint().

	When I issue the target remote command, it responds with an error:
		
		Couldn't establish connection to remote target
		procfs: couldn't find pid 42000 in procinfo list

	Based on what I found looking through the source for gdb, I
	implemented the qC command in the i386-stub and had it return
	an ID of -1.  Here is the output that is produced:

Script started on Fri Apr 12 15:24:42 2002

sholto kar 1: gdb
GNU gdb 5.1.1
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i386-pc-solaris2.7".
Setting up the environment for debugging gdb.
gdbinit:5: Error in sourced command file:
No symbol table is loaded.  Use the "file" command.
(gdb) target remote /dev/ttyb
Remote debugging using /dev/ttyb
sent qC packet, reply = QC-1 (oldpid = 42000)            <== my debug output
calling find_procinfo_or_die from stopped_by_watchpoint	 <== my debug output
Couldn't establish connection to remote target
procfs: couldn't find pid -1 in procinfo list.
(gdb) quit

sholto kar 2: exit
script done on Fri Apr 12 15:25:40 2002

	The "QC-1" is what the stub sent back to gdb, which shows that
	the communication is working.

My guess as to the cause of the problem: I don't have one.

Thanks for any information you can give me!

	- Ken

---
Kenneth A. Reek, Professor
Rochester Institute of Technology
Department of Computer Science
102 Lomb Memorial Drive
Rochester, NY 14623-0887 USA

kar@cs.rit.edu
716-475-6155 (voice)
716-475-7100 (fax)