Thread View: gnu.gdb.bug
2 messages
2 total messages
Started by Ed Simpson
Mon, 18 Dec 1989 17:46
make problems
Author: Ed Simpson
Date: Mon, 18 Dec 1989 17:46
Date: Mon, 18 Dec 1989 17:46
46 lines
2160 bytes
2160 bytes
I'm trying to make gdb on a Sun 3/260 running Sun OS 4.0.3 and I got
an error while making init.c. I did the following:
% config.gdb sun3os4
Make sure to compile any program on which you want to run gdb
without shared libraries (cc -Bstatic)
Linking `param.h' to `m-sun3os4.h'.
Linking `pinsn.c' to `m68k-pinsn.c'.
Linking `opcode.h' to `m68k-opcode.h'.
Linking `dep.c' to `sun3-dep.c'.
Editing Makefile
GDB is now set up for use with a sun3os4.
% make
.
.
.
cc -I. -g -Bstatic -c valprint.c
.
.
.
./munch main.o blockframe.o breakpoint.o findvar.o stack.o source.o values.o e
val.o valops.o valarith.o valprint.o printcmd.o symtab.o symmisc.o coffread.o d
bxread.o infcmd.o infrun.o remote.o command.o utils.o expread.o expprint.o pins
n.o environ.o version.o copying.o core.o inflow.o dep.o > init.c
nm: valprint.o: error reading string table
cc -I. -g -Bstatic -o gdb init.c main.o blockframe.o breakpoint.o findvar.o sta
ck.o source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o symtab
.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o command.o utils.o
expread.o expprint.o pinsn.o environ.o version.o copying.o core.o inflow.o dep
.o readline/libreadline.a obstack.o malloc.o -ltermcap
ld: valprint.o: bad string table index (pass 1)
*** Error code 4
make: Fatal error: Command failed for target `gdb'
-----------------------
valprint.c compiled with no errors. We're running standard versions
of cc and nm as they come from the Sun distribution. I don't have any
ideas on what's going wrong.
----------
Ed Simpson e-mail by ARPANET: evs@cs.duke.edu tel.: (919)660-5107
P.O.Box 3140, Duke Univ. Medical Center, Durham, NC, USA 27710
Re: make problems
Author: Ed Simpson
Date: Mon, 18 Dec 1989 21:57
Date: Mon, 18 Dec 1989 21:57
79 lines
3984 bytes
3984 bytes
This is regarding the last mail message where I reported nm failing on
valprint.o while trying to make gdb. I ran make clean, then make
again. This time nm failed on printcmd.o, so I removed it, and redid
make, then nm worked on printcmd.o and failed on symtab.o, so I
recompiled symtab.o, and then the make completed without error.
% make clean
.
.
.
% make
.
.
.
rm -f init.c
./munch main.o blockframe.o breakpoint.o findvar.o stack.o source.o values.o e
val.o valops.o valarith.o valprint.o printcmd.o symtab.o symmisc.o coffread.o d
bxread.o infcmd.o infrun.o remote.o command.o utils.o expread.o expprint.o pins
n.o environ.o version.o copying.o core.o inflow.o dep.o > init.c
nm: printcmd.o: error reading string table
cc -I. -g -Bstatic -o gdb init.c main.o blockframe.o breakpoint.o findvar.o sta
ck.o source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o symtab
.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o command.o utils.o
expread.o expprint.o pinsn.o environ.o version.o copying.o core.o inflow.o dep
.o readline/libreadline.a obstack.o malloc.o -ltermcap
ld: printcmd.o: bad string table index (pass 1)
*** Error code 4
make: Fatal error: Command failed for target `gdb'
% rm printcmd.o
% make
cc -I. -g -Bstatic -c printcmd.c
cd readline ; make "SYSV=" \
"DEBUG_FLAGS=-g -Bstatic" "CC=cc" libreadline.a
`libreadline.a' is up to date.
rm -f init.c
./munch main.o blockframe.o breakpoint.o findvar.o stack.o source.o values.o e
val.o valops.o valarith.o valprint.o printcmd.o symtab.o symmisc.o coffread.o d
bxread.o infcmd.o infrun.o remote.o command.o utils.o expread.o expprint.o pins
n.o environ.o version.o copying.o core.o inflow.o dep.o > init.c
nm: symtab.o: error reading string table
cc -I. -g -Bstatic -o gdb init.c main.o blockframe.o breakpoint.o findvar.o sta
ck.o source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o symtab
.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o command.o utils.o
expread.o expprint.o pinsn.o environ.o version.o copying.o core.o inflow.o dep
.o readline/libreadline.a obstack.o malloc.o -ltermcap
ld: symtab.o: bad string table index (pass 1)
*** Error code 4
make: Fatal error: Command failed for target `gdb'
% rm symtab.o
% make
cc -I. -g -Bstatic -c symtab.c
cd readline ; make "SYSV=" \
"DEBUG_FLAGS=-g -Bstatic" "CC=cc" libreadline.a
`libreadline.a' is up to date.
rm -f init.c
./munch main.o blockframe.o breakpoint.o findvar.o stack.o source.o values.o e
val.o valops.o valarith.o valprint.o printcmd.o symtab.o symmisc.o coffread.o d
bxread.o infcmd.o infrun.o remote.o command.o utils.o expread.o expprint.o pins
n.o environ.o version.o copying.o core.o inflow.o dep.o > init.c
cc -I. -g -Bstatic -o gdb init.c main.o blockframe.o breakpoint.o findvar.o sta
ck.o source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o symtab
.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o command.o utils.o
expread.o expprint.o pinsn.o environ.o version.o copying.o core.o inflow.o dep
.o readline/libreadline.a obstack.o malloc.o -ltermcap
ld: readline/libreadline.a: warning: archive has no table of contents; add one u
sing ranlib(1)
-----------------
A bit weird.
----------
Ed Simpson e-mail by ARPANET: evs@cs.duke.edu tel.: (919)660-5107
P.O.Box 3140, Duke Univ. Medical Center, Durham, NC, USA 27710
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads