Article View: gnu.misc.discuss
Article #1799Re: Attaching gdb to a running process on an HP
From: Lars Huttar
Date: Mon, 25 Jan 1993 16:44
Date: Mon, 25 Jan 1993 16:44
21 lines
2134 bytes
2134 bytes
In article <1993Jan24.205213.14915@bmerh85.bnr.ca> Hamish.Macdonald@bnr.ca (Hamish Macdonald) writes: > There are two ways to use gdb on an HPUX machine. > > 1) Get gcc to understand and insert HPUX debugging information into > the object files it creates. Also get gdb to understand and > retrieve HPUX debugging information from the executable. To my > knowledge, no-one has done this for a the 680x0 HP machines. The > folks at UUtah may have done this for the PA HP machines. [...] Yes, you can get a modified gcc-2.3.3.u3 for PA HP's from jaugar.utah.edu:/dist. I just downloaded hpuxbin.tar.Z, which contained the executables for gcc, gdb, etc. that worked (with symbolic debugging & all) without modification. Again, this is Precision Architecture HP's. I dunno about others. Lars Huttar, huttar@hp750.itg.ti.com 3 (Opinions herein are not || _______ ____ || necessarily those of TI.) ||: | | | | | | | | :|| Mars For a good time, call gettimeofday(). || _| _| _| _| _| _| _| _| ||
Technical Details
Message-ID:
<HUTTAR.93Jan25164454@hp750.itg.ti.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!stanford.edu!agate!spool.mu.edu!howland.reston.ans.net!zaphod.mps.ohio-state.edu!cs.utexas.edu!csc.ti.com!tilde.csc.ti.com!m2.dseg.ti.com!ief!ief!huttarReferences:
<EARL.93Jan22154851@jsi-bwb.jade.ab.ca> <TML.93Jan23110713@hemuli.tik.vtt.fi> <1993Jan23.200540.10828@Princeton.EDU> <1993Jan24.205213.14915@bmerh85.bnr.ca>Show Full Headers
Complete Article Headers
Newsgroups: gnu.misc.discuss,comp.sys.hp
Path: arc1-ca.pugleaf.net!sparky!uunet!stanford.edu!agate!spool.mu.edu!howland.reston.ans.net!zaphod.mps.ohio-state.edu!cs.utexas.edu!csc.ti.com!tilde.csc.ti.com!m2.dseg.ti.com!ief!ief!huttar
From: huttar@hp750.itg.ti.com (Lars Huttar)
Subject: Re: Attaching gdb to a running process on an HP
Sender: usenet@ief.itg.ti.com (Mr. USENET)
Message-ID: <HUTTAR.93Jan25164454@hp750.itg.ti.com>
In-Reply-To: Hamish.Macdonald@bnr.ca's message of Sun, 24 Jan 93 20:52:13 GMT
Date: Mon, 25 Jan 1993 16:44:54 GMT
References: <EARL.93Jan22154851@jsi-bwb.jade.ab.ca> <TML.93Jan23110713@hemuli.tik.vtt.fi>
<1993Jan23.200540.10828@Princeton.EDU>
<1993Jan24.205213.14915@bmerh85.bnr.ca>
Nntp-Posting-Host: iefhp750.itg.ti.com
Organization: IEF Development, Texas Instruments Inc., Plano Texas
X-Disclaimer: This message was written by a user at Texas Instruments Inc.
The opinions expressed within are those of the user and not
necessarily those of Texas Instruments.
Lines: 21