🚀 go-pugleaf

I built tar version 1.11.1 on an AT&T 3b1 (more or less System V, release 2).
It compiled without incident, and I've actually used it quite a bit.  I
recently used tar to duplicate a (small) file system, and I found that
tar had not correctly set the owner of directories (but did for files).
Enclosed is a typescript, which demonstrates the problem.  If you need more
information, I'll be happy to provide it.

Andy Fyfe					andy@cs.caltech.edu

marmot !1 $ su
Password:
marmot !1 # ls -lR /usr/tmp/test
total 3
drwxr-xr-x   2 bin      bin            48 Jan 24 17:13 bin
drwxr-xr-x   2 root     root           48 Jan 24 17:13 root
drwxr-xr-x   2 uucp     sys            48 Jan 24 17:13 uucp

/usr/tmp/test/bin:
total 0
-rw-r--r--   1 bin      bin             0 Jan 24 17:13 file

/usr/tmp/test/root:
total 0
-rw-r--r--   1 root     root            0 Jan 24 17:13 file

/usr/tmp/test/uucp:
total 0
-rw-r--r--   1 uucp     sys             0 Jan 24 17:13 file
marmot !2 # rm -rf /tmp/test
marmot !3 # ./tar --version
GNU tar version 1.11.1
marmot !4 # ./tar -C /usr/tmp -c -f - test | ./tar -C /tmp -x -v -p -f - --same-owner
test/
Reading test
test/bin/
Reading test/bin
test/bin/file
test/uucp/
Reading test/uucp
test/uucp/file
test/root/
Reading test/root
test/root/file
marmot !5 # ls -lR /tmp/test
total 3
drwxr-xr-x   2 root     root           48 Jan 24 17:13 bin
drwxr-xr-x   2 root     root           48 Jan 24 17:13 root
drwxr-xr-x   2 root     root           48 Jan 24 17:13 uucp

/tmp/test/bin:
total 0
-rw-r--r--   1 bin      bin             0 Jan 24 17:13 file

/tmp/test/root:
total 0
-rw-r--r--   1 root     root            0 Jan 24 17:13 file

/tmp/test/uucp:
total 0
-rw-r--r--   1 uucp     sys             0 Jan 24 17:13 file
marmot !6 # exit
marmot !2 $ exit