Pls help!! Hayes ACCURA 288 V.FC+FAX experience needed.

Thread View: hk.comp.pc

5 messages

[T] Back to Threads [V] Tree View [G] Group Articles

5 total messages Started by S.T. Wong Sun, 17 Sep 1995 11:58

Author: S.T. Wong
Date: Sun, 17 Sep 1995 11:58

22 lines
1162 bytes

Hi, there,

I've got a Hayes ACCURA 288 V.34/V.FC+FAX (however, the name on the manual
is "ACCURA 288 V.FC+FAX").

I can't  use it to connect to almost all BBS.  I did the same testing with 
a Supra FAX modem v.32bis to test the hardware used (e.g. the modem cable,
the software, the PC, etc.) but everything works fine.  

I tested with factory default setting and different (reasonable) combinations 
of setting but the situation didn't improved.  

Would anyone please help and advice ?  Would be much appreciated if you 
would also provide the "at&v" output of your modem.

Please reply to st-wong@cuhk.hk.  I'll post the summary.

Thank you very much !!

Best Regards,

S.T. Wong                           | Email: st-wong@cuhk.hk

Re: Pls help!! Hayes ACCURA 288 V.FC+FAX experience needed.

Author: Sam
Date: Sun, 17 Sep 1995 13:56

4 lines
669 bytes

I am also a Hayes ACCURA 288 User,so,i came across your problem,try to 
disable any hardware handshaking option.

GOODLUCK.

Re: Pls help!! Hayes ACCURA 288 V.FC+FAX experience needed.

Author: JOHN
Date: Sun, 17 Sep 1995 14:00

1 lines
611 bytes

TRY TO DISABLE ANY HARDWARE HANDSHAKING.

Re: Pls help!! Hayes ACCURA 288 V.FC+FAX experience needed.

Author: Jackie Mak
Date: Sun, 17 Sep 1995 16:55

13 lines
767 bytes

On 17 Sep 1995 13:56:21 GMT , Sam <sam811@mail.hkstar.com> wrote:

>I am also a Hayes ACCURA 288 User,so,i came across your problem,try to 
>disable any hardware handshaking option.


Why? I use it with hardware handshaking and I haven't got any problem.




Regards,
Jackie

Re: Pls help!! Hayes ACCURA 288 V.FC+FAX experience needed.

Author: Edwin CHAN
Date: Mon, 18 Sep 1995 07:09

29 lines
1756 bytes

In article <43h2h0$o1j@hpg30a.csc.cuhk.hk>, st@hp735c.csc.cuhk.hk (S.T. Wong) says:

>I've got a Hayes ACCURA 288 V.34/V.FC+FAX (however, the name on the manual
>is "ACCURA 288 V.FC+FAX").

Mine is same as yours, name on manual haven't changed.

>I can't  use it to connect to almost all BBS.  I did the same testing with 
>a Supra FAX modem v.32bis to test the hardware used (e.g. the modem cable,
>the software, the PC, etc.) but everything works fine.  

I use hardware handshaking and work with almost all BBS!! When I use 
software handshaking only, some problems may be raised. Could you tell 
more details how can't connect to BBS but succeed in Internet server?

>I tested with factory default setting and different (reasonable) combinations 
>of setting but the situation didn't improved.  
>Would anyone please help and advice ?  Would be much appreciated if you 
>would also provide the "at&v" output of your modem.

My init string is simply "atz"

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@                                               @
@          Edwin CHAN  from  HONG KONG          @
@ Email   : edwinchan%lxhk03@hkein.ie.cuhk.hk   @
@    or     edwinchan%lxhk03.ie.cuhk.hk@hk.net  @
@                                               @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads