🚀 go-pugleaf

At National-Louis University we have been using nupop for over a year
using packet drivers and have been very happy and pleased with its
performance and capability.  Recently we have had a need to configure
nupop using odi drivers and so far have not been successfull in
making it work.  We keep getting the message "packet driver is not
loaded".  If somebody could give me a few clues on what I am doing
wrong it would be greatly appreciated.  I have included copies of my
config.sys, autoexec.bat and net.cfg. This station is also connecting
via PC support to our IBM AS\400 and is why we are using odi.

CONFIG.SYS
==============================================
DEVICE=C:\DOS\SETVER.EXE
DEVICE= C:\DOS\HIMEM.SYS
DOS=HIGH,UMB
DEVICE=C:\WINDOWS\EMM386.EXE RAM NOEMS X=E000-E7FF x=c800-cbff
FILES=40
BUFFERS=40
lastdrive=f
devicehigh=c:\lsp\protman.dos /i:c:\lsp
devicehigh=c:\lsp\dxma0mod.sys 001
devicehigh=c:\lsp\dxme0mod.sys x
DEVICE=C:\PCS\EIMPCS.SYS P=0
STACKS=9,256

AUTOEXEC.BAT
===========================================
C:\WINDOWS\SMARTDRV.EXE
@ECHO OFF
CD DOSUP
LSL
NE2000
ODINSUP
\LSP\NETBIND
IPXODI
\DOSUP\NETX\NETX
c:\odipkt
PROMPT $p$g
PATH=C:\DOS;C:\WINDOWS;C:\WP51\
SET TEMP=C:\DOS
LOADHIGH C:\DOS\MOUSE.COM
G:
login


NET.CFG
==========================================
protocol odinsup
   bind ne2000
   buffered

link driver ne2000
   frame ethernet_802.3
   frame ethernet_802.2
   frame ethernet_II
   frame ethernet_snap


Thanks in advance for your help,




Thanks, Bob Davis
        National-Louis University
        Evanston, IL
        bdav@evan1.nl.edu