HYPERchannel defs of TCP/IP For MVS

Thread View: list.ibmtcp-l

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by PMW1 Wed, 28 Feb 1990 20:59

#163

Author: PMW1
Date: Wed, 28 Feb 1990 20:59

18 lines
1449 bytes

I recently received these from an unnamed IBM source.  Would anyone
like to confirm/deny the accuracy of them at any/all PTF levels?
--
Peter M. Weiss                   |  (this line intentionally left blank)
31 Shields Bldg (the AIS people) | Don't FAX me, I'll FAX you!
University Park, PA USA 16802    | Disclaimer :1 * applies herein
---------------------------clip here----------------------------------
   You don't need any additional software to attach a Hyperchannel to
   MVS TCPIP. It requires definitions for A220 Hyperchannel and IO
   definitions for the host. The following is the set of recommended
   IOCP definition for MVS.
   CNTLUNIT:
      cunumber=xxx,path=(yy),protocl=d,shared=n,unit=3705,
      unitadd=((zz,8))
   IODEVICE:
      unit=bsc1,address=(yzz,8)adapter=bsca,tcu=2701,cunumber=(xxx)
   Notes: a). 8 subchannels minimum can configure up to 64 subchannels.
          b). Address base has to be aligned on (00,40,80,c0) boundary.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads