Re: Datec to IBM problems

Article View: micro.general

Article #3

From: ctk
Date: Sat, 31 Mar 1984 20:57

8 lines
1009 bytes

Well folks, the problem was the following. I made my cable from ribbon cable
and solderless connectors that I got from Radio Shack. This arrangement
managed to reduce the voltage to the point where the Datec didn't konw
I was there. When I reduced the cable length to 10" all was well with the
regular 212. The PAL passess the local loopback test but will not auto-dial
since the Rom routine in the IBM wants to see DSR which the pal does not
provide. Tying pins 6 and 8 should fix this.
                           Watch those cheap cables, -- ctk

Technical Details

Message-ID: <2222@ecsvax.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!floyd!harpo!decvax!mcnc!ecsvax!ctk

References: ecsvax.2220

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!floyd!harpo!decvax!mcnc!ecsvax!ctk
From: ctk@ecsvax.UUCP
Newsgroups: micro.general,micro.ibm,net.micro,net.micro.pc,net.dcom
Subject: Re: Datec to IBM problems
Message-ID: <2222@ecsvax.UUCP>
Date: Sat, 31-Mar-84 15:57:23 EST
Article-I.D.: ecsvax.2222
Posted: Sat Mar 31 15:57:23 1984
Date-Received: Sun, 1-Apr-84 07:39:34 EST
References: ecsvax.2220
Lines: 8

Reply to Parent Message