FormTool vs HPLJII vs Pacific Data 25-in-1 cartridge

Thread View: micro.ibm

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Michael R. Volow Thu, 24 Aug 1989 05:11

#10

Author: Michael R. Volow
Date: Thu, 24 Aug 1989 05:11

17 lines
1325 bytes

Is there anyone who is using the form generating program, FormTools
with an HPLJ II, with a Pacific Data 25-in-1 font cartridge installed?
They have no driver for this particular cartridge, just for the bare
HPLJ II, or for most of the individual HP font cartridges (they use
a separate driver for each cartridge). I am able to print forms in
10 pitch on many of the fixed pitch cartridges. But when I try to
print with a 12-pitch cartridge (e.g. D) selection, it prints in 10
pitch with lines partially wrapped. Does anyone out there have this
combination of hardware and software and been able to make it work?

In addition, after printing, the HPLJ goes off line and gives a PC
????? EXEC message, cured bye resetting the printer. Any help would
be appreciated. Thanks in advance.

M Volow, VA Medical Center, Durham, NC 27705
mvolo@ecsvax.UUCP           919 286 0411

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads