🚀 go-pugleaf

In article <2890@tekigm2.TEK.COM>, pavelz@tekigm2.TEK.COM (Pavel R. Zivny) writes:
> >	There are commercially available fluorescent lighting systems
> >which use high frequency excitation.  The primary motivation for such
> >use is more efficient energy utilization, and not flicker reduction,
> >however.
>
> 	I am sorry to stretch the subject so much, but could you please
> describe more in detail where do the energy savings really come from?

	Two reasons:

1.	High frequency (3 kHz to 20 kHz) excitation will directly ionize
	the mercury vapor in the fluorescent lamp more efficiently
	than at 60 Hz, resulting in more lumens/watt of illumination.

2.	With ballasts being consequently smaller, there is less loss
	of energy to heat.

> The only
> warm thing inside the fluorescent light fixture is the tube

	Not true; consider the ballast!

> does the higher
> frequency change the distribution of energy between heat and light ?

	Yes - 1. above.

<>  Larry Lippman @ Recognition Research Corp., Clarence, New York
<>  UUCP:  {allegra|ames|boulder|decvax|rutgers|watmath}!sunybcs!kitty!larry
<>  VOICE: 716/688-1231        {hplabs|ihnp4|mtune|utzoo|uunet}!/
<>  FAX:   716/741-9635 {G1,G2,G3 modes}   "Have you hugged your cat today?"