🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: misc.forsale.computers.pc-specific.misc
Article #170

Re: ?Upgrade from 486 to P133?

#170
From: Keith Spraker
Date: Fri, 24 Oct 1997 00:00
55 lines
3231 bytes
bbandsb@pacbell.net (Bruce Beisel) wrote:

>In article <62o0vd$bvk@camel12.mindspring.com>, ixlr8@SPAMmindspring.com 
>says...
>> Yes you'll need another mother board. Any name brand board should do
>> the trick, since it seems you're not interested in cutting edge
>> technology. Unless your old 486 m/b was PCI you'll probably need a
>> video card and unless you had 72 pin SIMMs in your old board you'll
>> probably need new memory also.  Others in this newsgroup might advise
>> you differently, but if your on a budget, a VX board, k-5 133, and 32
>> megs of EDO should be obtainable for a little less than $300.00,
>> pretty good bang for the buck, but not a whole lot of room for
>> upgrading in the future.

>I disagree.  There is a whole lot of room for an upgrade.  If he gets a 
>decent HX, TX or VP3 board that supports 75 and 83 Mhz bus speed and up 
>to 4.0X multiplier he can upgrade to a 333 Mhz processor.  Considering 
>that the K5-133 runs at 100Mhz, I'd say there is lots of room to spare.

Excuse me, I should have clarified that with the VX (read CHEAP if on
budget) chipset there is not much room for upgrading. Only up to
200mmx. I also received an e-mail about my post (I believe to the
wrong person, should have been sent to original poster) that in Texas
a VX board and Cyrix 166+ was available for around 110 bucks, with
similar performance in iP133. Just another thought!

>See http://sysdoc.pair.com for information about motherboards, CPU and 
>memory.

>BTW, I'd wait another 2 weeks.  CPU prices are due to drop again.  I've 
>heard numbers like 25% being kicked around.  That should lower the K6-166 
>down to about $110.

>> mmkc@ace-net.com.au wrote:
>> 
>> >hello,	I'm going to upgrade my 486/DX to P133. Now, I know that I'll
>> >need to get a new CPU but do I need to get a new motherboard? And, I
>> >don't know what brand or kind it is. If so, could someone please suggest
>> >me a good brand? And, what other parts do I need to upgrade?
>> 

>-- 

>Bruce Beisel
>bbandsb@pacbell.net






Keith E. Spraker
Remove SPAM to reply!
Speed Kills, but it beats the heck out of going slow!
Technical Details
Message-ID: <62q63d$tst@camel18.mindspring.com>
Path: arc1-ca.pugleaf.net!unknown!not-for-mail
References: <877594549.10131@dejanews.com> <62o0vd$bvk@camel12.mindspring.com> <MPG.eb9d475f64ca8149896be@pbinews.pacbell.net>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 11561b,9477b8868140b554
X-Google-Attributes: gid11561b,public
X-Google-Thread: 10cada,9477b8868140b554
X-Google-Attributes: gid10cada,public
X-Google-Thread: 10a2ed,9477b8868140b554
X-Google-Attributes: gid10a2ed,public
X-Google-Thread: 108c83,9477b8868140b554
X-Google-Attributes: gid108c83,public
X-Google-Thread: 1045b9,9477b8868140b554
X-Google-Attributes: gid1045b9,public
From: ixlr8@SPAMmindspring.com (Keith Spraker)
Subject: Re: ?Upgrade from 486 to P133?
Date: 1997/10/24
Message-ID: <62q63d$tst@camel18.mindspring.com>
X-Deja-AN: 284714862
References: <877594549.10131@dejanews.com> <62o0vd$bvk@camel12.mindspring.com> <MPG.eb9d475f64ca8149896be@pbinews.pacbell.net>
X-Server-Date: 24 Oct 1997 12:59:25 GMT
Organization: MindSpring Enterprises, Inc.
Reply-To: ixlr8@SPAMmindspring.com
Newsgroups: misc.forsale.computers.pc-specific.misc,alt.comp.hardware.pc-homebuilt,misc.forsale.computers.pc-specific.motherboards,comp.sys.ibm.pc.hardware.chips,aus.computers