🚀 go-pugleaf

I'm looking for an Adaptec 2940 Kit to control my SCSI hard drive,
CD-ROM drive, CD-Recordable drive, and flatbed scanner.  I've been
told that the regular 2940 card will control all my peripherals
(including the CD-R drive) even though Adaptec's WWW documentation
says I need a "2940Ultra" kit.
 
I need the card, documentation, software drivers, cable, and
Adaptec's EZ-SCSI software (full version including CD-R utilities).
 
If you have the 2940 Kit for sale, let me know your price (shipped
to ZIP 43081).  I cannot purchase this until I raise the funds by
selling some of my "extra" equipment (listed below).  "Asking"
prices are listed, but feel free to make an offer.  I will also
gladly consider any trade offers using the items below.
 
-------------------------------------------------------------------
Memory:
 
Two (2) 2x36 (8meg) 72pin 70ns PARITY simms
        - each used less than 10 hours
        asking $40 each (or $75 for the pair)
 
Four (4) 2x32 (8meg) 72pin 70ns NON-PARITY simms
        - tested but not used otherwise
        asking $30 each (or $110 for all)
 
One (1) 2x36 (8meg) 72pin 70ns PARITY simm
        - used for about 2 months
        - for use in IBM PS/2 and Valuepoint systems
        - P/N 71F7011   FRU 92F0098
        asking $35
 
Two (2) 512x36 (2meg) 72pin 70ns PARITY simms
        asking $10 each
 
-------------------------------------------------------------------
Drives:
 
One (1) HP 240meg IDE 3.5"x1" drive
        - can't get my system to recognize it
        - was pulled from a working machine
        asking $25
 
One (1) Maxtor 200meg SCSI drive
        - was pulled from a working system
        asking $40
 
One (1) Toshiba 3401B internal 2x SCSI CDROM drive
        - used (lightly) about 1 year
        - works perfectly!
        asking $40
 
One (1) 1.2meg 5.25" floppy drive
        - removed from new system
        - new / never used
        asking $10
 
-------------------------------------------------------------------
Modems:
 
One (1) Megahertz 14.4K baud PCMCIA xjack modem
        - brand new / still in shrinkwrap
        asking $50
 
-------------------------------------------------------------------
Chips:
 
One (1) Intel 387DX/20 Co-processor
        asking $5
 
One (1) Intel 387DX/16 Co-processor
        asking $5
 
-------------------------------------------------------------------
Extras:
 
Two (2) 3c619 Token Ring cards (ISA bus)
        asking $20 each (or both for $35)
 
Two (2) IBM 16/4 Token Ring cards (MCA bus)
        asking $20 each (or both for $35)
 
One (1) AST 286 motherboard w/ CPU
        asking $10
 
One (1) PROCOM IDE/FD controller (ISA bus)
        asking $5
 
One (1) IDE/FD/Ser/Par/Game controller (VL-bus)
        asking $10
 
One (1) IDE/FD/Ser/Par/Game controller (ISA bus)
        asking $5
 
One (1) Western Digital MFM/FD controller (16-bit ISA bus)
        asking $10
 
One (1) 4-way Parallel switch box
        asking $30
 
One (1) 3-way Centronics switch box
        asking $25
 
Six (6) IBM Token Ring MAU's
        -each adds 8 ports to your TR network
        -used but all work perfectly!
        asking $40 each (or all 6 for $210)
 
Two (2) AMP brand Token Ring MAU's
        -each adds 8 ports to your TR network
        -used but all work perfectly!
        asking $40 each (or both for $75)
 
-------------------------------------------------------------------
** Note **:  Shipping is NOT included in the prices listed above
             but may be negotiable depending on which items you are
             interested in.
-------------------------------------------------------------------
If you are interested in anything I've got listed above, please
contact me ASAP!  If you're not, then thanks for taking the time to
read my post!
 
Cheers!!!
 
- Dave Fisher
  Columbus, OH
  dfisher@freenet.columbus.oh.us
-- 
dfisher@freenet.columbus.oh.us