🚀 go-pugleaf

Intel Inboard/PC bundled with 2 Meg piggyback board	500.00

	These boards take up only one slot in an IBM XT,
	Tandy 1200 HD, Compaq, Compaq portable or
	Leading Edge Model D.  The Inboard turns an
	8088 machine into a 386SX running at 16MHz
	with minimum effort.  The Inboard has 1 Meg
	of RAM on it, the piggyback gives the added
	2 Meg for a total of 3Meg.  You need to remove
	the 8088 chip (and 8087 co-processor if present)
	and disable the memory on the motherboard. 
	Both boards are in their original boxes with 
	all documentation and disk utilities necessary
	for installation. Still under warranty. 

Internal 2400 baud Modem				35.00

8087 co-processor (probably for 4-5 MHz machines only)	10.00

Microsoft Mouse (Bus version with board)		30.00
	Installation disks, etc. included

360K Floppy drive (beige plate)				25.00

Kraft trackball (installation disks, etc.)		30.00
	This is plugs into the serial port

286 motherboard with 2087 co-processor		       100.00
		(this is an 8 MHz 80286)

Apple LocalTalk PC board			       100.00
	This board allows you to hook a DOS based
	machine to an Apple LocalTalk network.  Most
	useful for sharing a Laserwriter with a bunch
	of Macs.  In original box, with warranty reg.
	card, installation utilities, manual, etc.
	Takes a short slot on the board.

Please send e-mail to me at: vos@helix.nih.gov or call 301-770-9529
and leave a message.