FA: Fluke 8024B 3½ Digit DMM

Thread View: misc.industry.electronics.marketplace

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Lew Coppes Sun, 03 Mar 2002 13:17

#33

Author: Lew Coppes
Date: Sun, 03 Mar 2002 13:17

31 lines
2224 bytes

Fluke 8024B Measures AC/DC Volts, AC/DC Current, Ohms, Peak Hold,
conductance, Logic Level detection, High speed audible continuity
(50 �s response).

Peak Hold is very usefull for capturing transient dc peaks or ac
surges. For dc, the most positive value will be displayed on the
LCD, and peaks typically as short as 2 ms are captured.
Average-sensing, rms-indicating techniques are used for ac for
transients as short as 150 ms for 48 to 450 Hz waveforms.

Temperatures from 20 �C to 1265 �C using K-type thermocouples (NOT
INCLUDED).  Probes/Manual are NOT included.

Fully Tested! 30-Day Warranty, Parts & Labor Only. 10-day
right-of-return.

See it at:
http://www.sellyouritem.com/ItemView.html?ItemID=345283


We can accept VISA, MasterCard and Discover Card directly.

Please check out our web site at:
http://www.thetestequipmentstore.com  for any test equipment needs
you may have.

--
Lew Coppes Tucson, AZ 85749
Phone: 520-749-8471 Fax: 520-760-7780
lcoppes@fastucson.net
http://www.thetestequipmentstore.com

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads