Thread View: misc.industry.electronics.marketplace
1 messages
1 total messages
Started by Lew Coppes
Sat, 19 Jan 2002 14:25
FA: TEK R7603/D20 Digitizing 'scope
Author: Lew Coppes
Date: Sat, 19 Jan 2002 14:25
Date: Sat, 19 Jan 2002 14:25
128 lines
6537 bytes
6537 bytes
--------------273313A663C361212C44D017 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Just listed on ebay, TEK R7603 with Option 20, and a 7D20 Programmable Digitizer. The Tektronix R7603 Rack-Mount Oscilloscope mainframe represents the best price/performance ratio available in the 100 MHz plug-in oscilloscope market. This one is equipped with Option 20 - IEEE Standard 488 interface. The CRT is large -- 8 X 10 division -- and features an internal graticule with variable illumination and 15 kV accelerating potential.. Two left-hand plug-in compartments will accept any of the TEK 7000 Series plug-ins. The third compartment - on the right side - is compatible with all 7000 Series Timebase plug-ins. This unit is equipped with the Tektronix model 7D20 Programmable Digitizer. The 7D20 is a GPIB programmable plug-in that is compatible with all 7000 Series mainframes, except the TEK 7104. This plug-in creates a fully programmable digitizing oscilloscope. The 7D20 can accurately measure the amplitude of a 50 ns wide transient event. Dual samplers simultaneously acquire two channels as if it were a "dual-beam" scope. Beyond basic acquisition, the 7D20 offers signal averaging to reduce uncorrelated noise, envelope displays to compare dynamic characteristics of changing signals, pretrigger for viewing prior to the trigger event, storage of six independent waveforms plus a reference waveform, cursors for more accurate two-dot measurements, and user prompting and menu displays to improve user interface effectiveness. A 40 MHz maximum sampling rate provides approximately 10 MHz single-shot bandwidth and up to 70 MHz bandwidth with repetitive signals. Buy it Now for $450.00 You can see it at: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1692822444 See my other auctions at: http://cgi6.ebay.com/aw-cgi/eBayISAPI.dll?ViewListedItems&userid=lcoppes&include=0&since=-1&sort=2&rows=25 We can accept VISA, MasterCard and Discover Card directly. We have also just opened our web site at http://www.thetestequipmentstore.com Please check it out for any test equipment needs you may have. -- Lew Coppes Tucson, AZ 85749 Phone: 520-749-8471 Fax: 520-760-7780 lcoppes@fastucson.net http://www.thetestequipmentstore.com --------------273313A663C361212C44D017 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> Just listed on ebay, TEK R7603 with Option 20, and a 7D20 Programmable Digitizer. <p>The Tektronix R7603 Rack-Mount Oscilloscope mainframe represents the best price/performance ratio <br> available in the 100 MHz plug-in oscilloscope market. This one is equipped with Option 20 - IEEE Standard <br> 488 interface. <p> The CRT is large -- 8 X 10 division -- and features an internal graticule with variable illumination and 15 kV <br> accelerating potential.. <p> Two left-hand plug-in compartments will accept any of the TEK 7000 Series plug-ins. The third <br> compartment - on the right side - is compatible with all 7000 Series Timebase plug-ins. <p> This unit is equipped with the Tektronix model 7D20 Programmable Digitizer. The 7D20 is a GPIB <br> programmable plug-in that is compatible with all 7000 Series mainframes, except the TEK 7104. This <br> plug-in creates a fully programmable digitizing oscilloscope. <p> The 7D20 can accurately measure the amplitude of a 50 ns wide transient event. Dual samplers <br> simultaneously acquire two channels as if it were a "dual-beam" scope. <p> Beyond basic acquisition, the 7D20 offers signal averaging to reduce uncorrelated noise, envelope <br> displays to compare dynamic characteristics of changing signals, pretrigger for viewing prior to the trigger <br> event, storage of six independent waveforms plus a reference waveform, cursors for more accurate <br> two-dot measurements, and user prompting and menu displays to improve user interface effectiveness. <p> A 40 MHz maximum sampling rate provides approximately 10 MHz single-shot bandwidth and up to 70 MHz <br> bandwidth with repetitive signals. <p>Buy it Now for $450.00 <p>You can see it at: <br><a href="http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=">http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1692822444</a> <br> <p>See my other auctions at: <br><a href="http://cgi6.ebay.com/aw-cgi/eBayISAPI.dll?ViewListedItems&userid=lcoppes&include=0&since=-1&sort=2&rows=25">http://cgi6.ebay.com/aw-cgi/eBayISAPI.dll?ViewListedItems&userid=lcoppes&include=0&since=-1&sort=2&rows=25</a> <p>We can accept VISA, MasterCard and Discover Card directly. <p>We have also just opened our web site at <a href="http://www.thetestequipmentstore.com">http://www.thetestequipmentstore.com</a> <br>Please check it out for any test equipment needs you may have. <br> <p>-- <br>Lew Coppes Tucson, AZ 85749 <br>Phone: 520-749-8471 Fax: 520-760-7780 <br>lcoppes@fastucson.net <br><a href="http://www.thetestequipmentstore.com">http://www.thetestequipmentstore.com</a> <br> </html> --------------273313A663C361212C44D017--
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads