Changeable polyhedral inserts for cutting tools.

Thread View: misc.industry.quality

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Firma Ukar Tue, 17 Jun 1997 00:00

Author: Firma Ukar
Date: Tue, 17 Jun 1997 00:00

28 lines
1953 bytes

UKAR, ltd.

Hard alloys inserts soldering for cutting tools

 are produced in the form of sintered hard alloys on the basis of tungsten
 carbides, titanium and tantalum on cobalt binder.The BK6, BK8, T15K6,
 T14K8, T5K10, TT6K8, TT7K9 alloys are produced.

 Depending on grade alloy they are used for rough and half rough turning,
 milling, drilling, core drilling, cutting and other sorts of noncontinuons
 surfaces proccesing of grey cast iron, corrosion-resisting steels and alloys
 including titanium alloys nonmetals materials.

 The solder on the basis of copperare used in the main for alloys
 soldering.Powders contained borax are used as a flux.The most effective
 are the synthetic diamands disks for soldered grinding.

 The disks of green silocon carbide also are used extensively.

 The quality and reliability of carbide cutting tools with soldering inserts is
 provided under observing conditions of soldering and grinding.

 For more information, please contact with marketing department of UKAR, ltd.

252107, Kiev,                            Telefax:         (044) 213-64-62
Nagornaya st., 12,                                              213-10-44
Ukar, ltd.                               E-mail:        comm@ukar.kiev.ua

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads