config program for Everex "Magic" board needed

Article View: misc.wanted

Article #2829

#2829

From: Anthony A. Datri
Date: Fri, 24 Feb 1989 23:41

14 lines
1181 bytes

I'm adding memory to an AT-style Everex "Magic" multifunction card,
and I can't find the floppy that came with it, which contains
software that tells you how to set the switches and which banks
to install the chips in.  I'd greatly appreciate either a copy of
this software or the settings and chip placements.  The board had
one row of 256k chips, but was only using 128k of it to fill base
memory to 640k; I bought a set of 64k chips to do that and now want
to use the 256k chips for extended memory.
-- 
@disclaimer(Any concepts or opinions above are entirely mine, not those of my
	    employer, my GIGI, my VT05, or my 11/34)
beak is@>beak is not
Anthony A. Datri @SysAdmin(Stepstone Corporation) aad@stepstone.com stpstn!aad

Technical Details

Message-ID: <2851@stpstn.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!sun!pitstop!sundc!seismo!uunet!hsi!stpstn!aad

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!sun!pitstop!sundc!seismo!uunet!hsi!stpstn!aad
From: aad@stpstn.UUCP (Anthony A. Datri)
Newsgroups: misc.wanted,comp.sys.ibm.pc
Subject: config program for Everex "Magic" board needed
Message-ID: <2851@stpstn.UUCP>
Date: 24 Feb 89 23:41:54 GMT
Reply-To: aad@stepstone.com
Organization: The Stepstone Corporation, Sandy Hook, CT
Lines: 14