🚀 go-pugleaf

I have a spare photocopier that I would like to dispose of.  I purchased it
intending to pull some parts from it for my other copier, but ended up not
doing so.  Although functional, it does need a significant amount of work to
put it in "prime" condition.  I just had a copier tech do a full checkout on
it, and have the notes available on what needs to be done.  Basically, he
says it needs a full preventative maintenance call (rollers, developer,
etc.) plus a new drum and blades (due to lines on the drum).  His estimate was
approximately $600 in total to do this, as I recall.  The PM cycle is once every
60,000 copies, and he says it normally runs a bit over $200 for a PM call.

Specifications are:

Harris/3M 6040 DF (also sold as Toshiba BD-8412) with optional duplexer and
large-capacity paper tray

Suggested retail as configured:  $9715.00

Multicopy speed:           40 copies per minute
Maximum original size:     11 x 17
Maximum copy size:         11 x 17
Paper feed:                Triple cassette (250 sheet each)
			   This unit includes a large capacity feeder as the
			   third cassette, which holds 1500 sheets
Manual bypass:             Stack of 25
Document feed:             Manual or Automatic
Reduction/enlargement:     65% to 154% in 1% increments, plus four standard
			   presets
Rated monthly copy volume: 1 to 50,000
Color:                     Standard plus selectable alternate color
			   (blue/brown/red)
Duplexing:                 Manual or Automatic 1:2

Dimensions:		   20 x 31-3/4 x 23-1/2 inches (tabletop)
Weight:                    194 lbs.
Power:                     Standard 120v AC (does NOT require a special line)

Other features:            Auto paper selection
			   Automatic exposure (with override)
			   Book copy
			   Image shift
			   Border erase
			   Image overlay
			   Pause/interrupt

I am selling it for $350, operable but needing work as mentioned above.  I
would prefer to keep it, and would do so if I had the space.  Unfortunately,
unless I get rid of it and many other items I will not have space for my car
in the garage this winter.  And I hate the cold...   :-)

For the $350 you get the copier, the stand, and the results of the $95
service call I just paid to have it checked out.  Such a deal...

If you are interested in it, give me a call at 475-1527.  If you know of
someone else who might have a use for it, have them call!

Thanks!

-- 
Greg Kemnitz / K and K Systems / PO Box 47804 / Plymouth, MN 55447-0804
Internet: gk@kksys.com  / Voice: +1 612 475 1527 / Fax: +1 612 449 0488
Alternate Internet: gk@kksys.mn.org   /   ICBM:  44 59 20 N, 93 28 22 W