Digiboard...

Thread View: mn.general

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Ken Germann Thu, 17 Feb 1994 22:24

#507

Author: Ken Germann
Date: Thu, 17 Feb 1994 22:24

7 lines
1091 bytes

Digiboard past its IS9000 inspection and is now officially ISO9000 certified.

--
  Ken Germann		  			Digiboard Inc.
  keng@digibd.com		        	Technical Support.
  (612)943-9020 Voice				6400 Flying Cloud Dr.
  (612)943-0447 Faxback				Eden Prairie, Mn 55344

Re: Digiboard...

#508

Author: Ken Germann
Date: Thu, 17 Feb 1994 22:55

14 lines
1328 bytes

Ken Germann (keng@news.digibd.com) wrote:
: Digiboard past its IS9000 inspection and is now officially ISO9000 certified.

Correction:

Digiboard passed its IS9000 inspection and is now officially ISO9000 
certified.


--
  Ken Germann		  			Digiboard Inc.
  keng@digibd.com		        	Technical Support.
  (612)943-9020 Voice				6400 Flying Cloud Dr.
  (612)943-0447 Faxback				Eden Prairie, Mn 55344

Re: Digiboard...

#509

Author: Clayton Haapala
Date: Fri, 18 Feb 1994 00:47

13 lines
1191 bytes

In article <CLE3KD.LCp@gw.digibd.com> keng@news.digibd.com (Ken Germann) writes:
>Digiboard past its IS9000 inspection and is now officially ISO9000 certified.

Network Systems just [successfully] went through this, as well.  BSI were
the auditors.  It is possible to have manufacturing certified and NOT have
your engineering  so certified.  NSC did both.

Software development is
particularly difficult in that it has a special set of requirements called
TAP, (I think -- somebody from NSC help me out on this one.)
-- 
Clayton Haapala (clayh@uum1.mn.org)
Mail Admin for MN.Org

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads