Thread View: mod.amiga
1 messages
1 total messages
Started by stever
Sun, 19 Oct 1986 21:20
Diffs for vt100 version 2.2
Author: stever
Date: Sun, 19 Oct 1986 21:20
Date: Sun, 19 Oct 1986 21:20
301 lines
9287 bytes
9287 bytes
I have kept a running list of changes and updates to Dave Wecker's vt100.
The following diffs are for version 2.2. The diff to init.c corrects a
problem pointed out by Dawn Banks in article <4625@decwrl.DEC.COM>
(posted on August 4th). Lattice C is unable to cope with the construct
[n+1]. To avoid problems here, all occurrences of [n+1] are replaced by
[nplus1], which is defined as an int and set equal to n+1 (surprise!).
The diffs to kermit.c and script.c are taken from a very recent article
by Dave Wecker (<5980@decwrl.DEC.COM>). These correct problems that
he found. Dave also mentioned the need to remove a couple of lines
from vt100.h, but this was apparently done by the mod.amiga.sources
moderator.
The changes to init.c will suit it to the Lattice compiler without
breaking Manx.
Steve Rice
----------------------------------------------------------------------------
{decvax | hplabs | ihnp4 | uw-beaver}!tektronix!videovax!stever
============================================================================
*** init.c.orig Thu Oct 16 11:12:11 1986
--- init.c Fri Oct 17 18:25:03 1986
***************
*** 349,355
/*****************************************************************/
void InitFileItems()
{
! int n;
/* initialize each menu item and IntuiText with loop */
for( n=0; n<FILEMAX; n++ )
--- 349,355 -----
/*****************************************************************/
void InitFileItems()
{
! int n, nplus1;
/* initialize each menu item and IntuiText with loop */
for( n=0; n<FILEMAX; n++ )
***************
*** 354,360
/* initialize each menu item and IntuiText with loop */
for( n=0; n<FILEMAX; n++ )
{
! FileItem[n].NextItem = &FileItem[n+1];
FileItem[n].LeftEdge = 0;
FileItem[n].TopEdge = 10 * n;
FileItem[n].Width = 120;
--- 354,361 -----
/* initialize each menu item and IntuiText with loop */
for( n=0; n<FILEMAX; n++ )
{
! nplus1 = n+1;
! FileItem[n].NextItem = &FileItem[nplus1];
FileItem[n].LeftEdge = 0;
FileItem[n].TopEdge = 10 * n;
FileItem[n].Width = 120;
***************
*** 395,401
/************************************************************************/
void InitCommItems()
{
! int n;
/* initialize each menu item and IntuiText with loop */
for( n=0; n<COMMAX; n++ )
--- 396,402 -----
/************************************************************************/
void InitCommItems()
{
! int n, nplus1;
/* initialize each menu item and IntuiText with loop */
for( n=0; n<COMMAX; n++ )
***************
*** 400,406
/* initialize each menu item and IntuiText with loop */
for( n=0; n<COMMAX; n++ )
{
! CommItem[n].NextItem = &CommItem[n+1];
CommItem[n].LeftEdge = 0;
CommItem[n].TopEdge = 10 * n;
CommItem[n].Width = 88;
--- 401,408 -----
/* initialize each menu item and IntuiText with loop */
for( n=0; n<COMMAX; n++ )
{
! nplus1 = n+1;
! CommItem[n].NextItem = &CommItem[nplus1];
CommItem[n].LeftEdge = 0;
CommItem[n].TopEdge = 10 * n;
CommItem[n].Width = 88;
***************
*** 436,442
for( n=0; n<RSMAX; n++ )
{
! RSItem[n].NextItem = &RSItem[n+1];
RSItem[n].LeftEdge = 75;
RSItem[n].TopEdge = 10 * n;
RSItem[n].Width = 56;
--- 438,445 -----
for( n=0; n<RSMAX; n++ )
{
! nplus1 = n+1;
! RSItem[n].NextItem = &RSItem[nplus1];
RSItem[n].LeftEdge = 75;
RSItem[n].TopEdge = 10 * n;
RSItem[n].Width = 56;
***************
*** 484,490
for( n=0; n<PARMAX; n++ )
{
! ParItem[n].NextItem = &ParItem[n+1];
ParItem[n].LeftEdge = 75;
ParItem[n].TopEdge = 10 * n;
ParItem[n].Width = 56;
--- 487,494 -----
for( n=0; n<PARMAX; n++ )
{
! nplus1 = n+1;
! ParItem[n].NextItem = &ParItem[nplus1];
ParItem[n].LeftEdge = 75;
ParItem[n].TopEdge = 10 * n;
ParItem[n].Width = 56;
***************
*** 525,531
/* initialize each menu item and IntuiText with loop */
for( n=0; n<XFMAX; n++ )
{
! XFItem[n].NextItem = &XFItem[n+1];
XFItem[n].LeftEdge = 75;
XFItem[n].TopEdge = 10 * n;
XFItem[n].Width = 80;
--- 529,536 -----
/* initialize each menu item and IntuiText with loop */
for( n=0; n<XFMAX; n++ )
{
! nplus1 = n+1;
! XFItem[n].NextItem = &XFItem[nplus1];
XFItem[n].LeftEdge = 75;
XFItem[n].TopEdge = 10 * n;
XFItem[n].Width = 80;
***************
*** 563,569
/*****************************************************************/
void InitScriptItems()
{
! int n;
/* initialize each menu item and IntuiText with loop */
for( n=0; n<SCRIPTMAX; n++ )
--- 568,574 -----
/*****************************************************************/
void InitScriptItems()
{
! int n, nplus1;
/* initialize each menu item and IntuiText with loop */
for( n=0; n<SCRIPTMAX; n++ )
***************
*** 568,574
/* initialize each menu item and IntuiText with loop */
for( n=0; n<SCRIPTMAX; n++ )
{
! ScriptItem[n].NextItem = &ScriptItem[n+1];
ScriptItem[n].LeftEdge = 0;
ScriptItem[n].TopEdge = 10 * n;
ScriptItem[n].Width = 128;
--- 573,580 -----
/* initialize each menu item and IntuiText with loop */
for( n=0; n<SCRIPTMAX; n++ )
{
! nplus1 = n+1;
! ScriptItem[n].NextItem = &ScriptItem[nplus1];
ScriptItem[n].LeftEdge = 0;
ScriptItem[n].TopEdge = 10 * n;
ScriptItem[n].Width = 128;
***************
*** 602,608
/*****************************************************************/
void InitUtilItems()
{
! int n;
/* initialize each menu item and IntuiText with loop */
for( n=0; n<UTILMAX; n++ )
--- 608,614 -----
/*****************************************************************/
void InitUtilItems()
{
! int n, nplus1;
/* initialize each menu item and IntuiText with loop */
for( n=0; n<UTILMAX; n++ )
***************
*** 607,613
/* initialize each menu item and IntuiText with loop */
for( n=0; n<UTILMAX; n++ )
{
! UtilItem[n].NextItem = &UtilItem[n+1];
UtilItem[n].LeftEdge = 0;
UtilItem[n].TopEdge = 10 * n;
UtilItem[n].Width = 88;
--- 613,620 -----
/* initialize each menu item and IntuiText with loop */
for( n=0; n<UTILMAX; n++ )
{
! nplus1 = n+1;
! UtilItem[n].NextItem = &UtilItem[nplus1];
UtilItem[n].LeftEdge = 0;
UtilItem[n].TopEdge = 10 * n;
UtilItem[n].Width = 88;
============================================================================
*** kermit.c.orig Sat Oct 18 02:09:46 1986
--- kermit.c Sat Oct 18 02:14:22 1986
***************
*** 784,790
data[3] = ctl(MYPCHAR);
data[4] = tochar(MYEOL);
data[5] = MYQUOTE;
! if ((p_parity >= 0) || ebqflg) { /* 8-bit quoting... */
data[6] = MYEBQ; /* If parity or flag on, send &. */
if ((ebq > 0040 && ebq < 0100) || /* If flag off, then turn it on */
(ebq > 0140 && ebq < 0177) || /* if other side has asked us to */
--- 784,790 -----
data[3] = ctl(MYPCHAR);
data[4] = tochar(MYEOL);
data[5] = MYQUOTE;
! if ((p_parity > 0) || ebqflg) { /* 8-bit quoting... */
data[6] = MYEBQ; /* If parity or flag on, send &. */
if ((ebq > 0040 && ebq < 0100) || /* If flag off, then turn it on */
(ebq > 0140 && ebq < 0177) || /* if other side has asked us to */
***************
*** 811,817
if (data[6] == 0) return;
ebq = data[6];
if ((ebq > 040 && ebq < 0100) || (ebq > 0140 && ebq < 0177)) ebqflg = 1;
! else if (((p_parity >= 0) || ebqflg) && (ebq == 'Y')) {
ebqflg = 1;
ebq = '&';
}
--- 811,817 -----
if (data[6] == 0) return;
ebq = data[6];
if ((ebq > 040 && ebq < 0100) || (ebq > 0140 && ebq < 0177)) ebqflg = 1;
! else if (((p_parity > 0) || ebqflg) && (ebq == 'Y')) {
ebqflg = 1;
ebq = '&';
}
============================================================================
*** script.c.orig Sat Oct 18 02:05:58 1986
--- script.c Sat Oct 18 02:09:32 1986
***************
*** 339,344
exit_script();
script_start(p);
}
}
void cmd_ks(file)
--- 339,345 -----
exit_script();
script_start(p);
}
+ else exit_script();
}
void cmd_ks(file)
============================================================================
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads