🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: mod.computers.68k
2 messages
2 total messages Started by mwm Sun, 15 Feb 1987 02:09
[ssc-vax!tld@beaver.cs.washington.edu (Thomas L Davis): S/W for CompuPro/Viasyn H/W]
#151
Author: mwm
Date: Sun, 15 Feb 1987 02:09
51 lines
2529 bytes
Oh, yeah, I forgot to mention - I also sometimes forward comp.sys.68k
to info-68k.

	<mike
------- Forwarded Message

Date: 13 Feb 87 17:58:53 GMT
From: ssc-vax!tld@beaver.cs.washington.edu  (Thomas L Davis)
Organization: Boeing Aerospace Corp., Seattle WA
Subject: S/W for CompuPro/Viasyn H/W
Message-Id: <766@ssc-bee.ssc-vax.UUCP>
Sender: info-68k-request@ucbvax.berkeley.edu
To: info-68k@ucbvax.Berkeley.EDU



A friend and I both have 68000 systems that use, mostly,
CompuPro IEE-696 hardware. We are running CP/M-68K, which is a
better instantiation than CP/M-80 2.2, but would like to look 
at other possibilities.

OS9/68K has received lots of good reviews but is not available
for the CPro h/w. There is also a UN*X port, I believe by
Dynaport, available. I saw recently, in IEEE Software, that
Pecan had bought out Volition Systems, purveyors of the p-system
for the 68K and others. Does anyone know if the p-sys is
available for CPro h/w and, more likely, if not, how much work
is necessary to accomplish the port?

I know that CDOS 5.0 (by whatever name it is being called this
week) has been/is being ported to run on CPro 80x86 products. Is
anyone aware, and can they speak, of any equivalent effort for
the CPro 68K machine?

Given that the 68K series is orders of magnitude better
architecturaly than the 80x86 machines (NB the preceding is a
completely objective statement!), it sure would be nice to see
more generic 68K s/w, as opposed to vendor-specific s/w,
available to the general/hacking community.


- - - - - - - - - -

Tom Davis			USENET: ... !uw-beaver!ssc-vax!ssc-bee!tld
C3I Systems Technology		COMPUSERVE: 70110,555
Boeing Aerospace Co.

*** All opinions expressed (good, bad, or otherwise) are mine and in no way
reflect opinion or policy of Boeing Aerospace Co. or The Boeing Company. ***

------- End of Forwarded Message
Re: [(Thomas L Davis): S/W for CompuPro/Viasyn H/W]
#163
Author: jejones
Date: Wed, 18 Feb 1987 15:30
18 lines
1217 bytes
>OS9/68K has received lots of good reviews but is not available
>for the CPro h/w.

There is a company in Illinois, called Ultrascience that advertised
(advertises?) S-100 bus systems running OS-9/68000 in an Alpha
Micro Systems user group magazine.  I don't know if they use CompuPro/
Viasyn hardware, but it might be worth a call to them.  Address and
phone:

	Ultrascience
	1824 Wilmette Ave.
	Wilmette IL 60091
	(312) 256-0080

I don't know anything about these folks or their products save that
I saw one of their ads once, I fear.  [insert favorite disclaimer]

		James Jones
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads