Re: HP to AT comm

Article View: mod.computers.laser-printers

Article #780

Back to mod.computers.laser-printers Previous Next

#780

From: bam
Date: Tue, 31 Mar 1987 16:00

22 lines
1403 bytes

The symptoms you describe do sound like a handshaking problem.

Assuming that your cable has been built properly, the AT or XT
will drive the Laserjet just fine with X-ON/X-OFF flow control.

IF your printer is on com1:

MODE COM1:96,n,8,1,p

will configure the serial port correctly.  The 'p' sets the port
for printer handshaking.

If that still doesn't work, check the switches inside the printer
and make sure everythng is set as per the factory.

Now if that doesn't help, send me a private note and I'll send
you cable pinouts.  I tried to reply directly but my mail bounced
as undeliverable.

Bret Marquis
bam@bigbang.cts.com

Technical Details

Message-ID: <8704011702.AA12518@brillig.umd.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ucbvax!bigbang.UUCP!bam

References: <8703271615.AA27290@brillig.umd.edu> <8703301821.AA16996@brillig.umd.edu>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ucbvax!bigbang.UUCP!bam
From: bam@bigbang.UUCP.UUCP
Newsgroups: mod.computers.laser-printers
Subject: Re: HP to AT comm
Message-ID: <8704011702.AA12518@brillig.umd.edu>
Date: Tue, 31-Mar-87 11:00:23 EST
Article-I.D.: brillig.8704011702.AA12518
Posted: Tue Mar 31 11:00:23 1987
Date-Received: Sat, 4-Apr-87 05:34:58 EST
References: <8703271615.AA27290@brillig.umd.edu> <8703301821.AA16996@brillig.umd.edu>
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: bigbang!bam@seismo.CSS.GOV (Bret A. Marquis)
Distribution: world
Organization: Internet Communications Co. - San Diego, Ca.
Lines: 22
Approved: laser-lovers@washington.arpa

Reply to Parent Message