Hayes modems and Masscomps

Thread View: mod.computers.masscomp

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Charles D'Ambra [ASP] Sun, 21 Sep 1986 07:12

#52

Author: Charles D'Ambra [ASP]
Date: Sun, 21 Sep 1986 07:12

27 lines
1782 bytes

Although Hayes modems are officially unsupported by Masscomp, it is possible
to use them with uucp.  Put the dialing commands in the chat script.  Here's
a example entry for the L.sys file:

hostname Any cul0 1200 cul0 "" AT OK ATDP5551212 CONNECT "" ogin:-@-ogin:-EOT-ogin:-BREAK-ogin: uucp word: ________

The script says
1. expect nothing (""), then transmit AT
2. expect OK, transmit the phone number -- if using a touch tone line
   substitute "T" for "P"
3. expect CONNECT, send nothing (by default uucp tacks on a carriage return,
   which will start the login sequence)
4. expect the login prompt, send the login name, i.e. uucp
5. expect the password prompt, send whatever the password actually is (remove
   this part if uucp can login without a password)

    allegra!nbires
    ucbvax!hplabs \                 Chuck D'Ambra
                 \ \                National Center for Atmospheric Research
         seismo - hao!asp-m!chuck   P.O. Box 3000
                  /                 Boulder, CO 80307
{decvax|ihnp4}!noao                    

ARPA:  chuck%ncar@CSNET-RELAY.ARPA

[moderator's note: The Hayes modem will work as an ACU in RTU 3.1 I am
told, but it is still unsupported. -- sob]

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads