🚀 go-pugleaf

Thanks to those who responded to my previous message. I think I now
have an address that will work reliably. Here is a reposting on an
old message that I don't think made it through.
--------------------------------------------------------------------


We have just received our new B8k (6 processors), and it seems to be
running very nicely as a Unix multiuser system. Our plan is to
observe it in action to learn more about multiprocessor measurement and
performance characteristics. As a first step in this direction, we
are wiring cards to be placed in the Multibus box, to detect and 
acknowledge writes to specific Multibus memory or I/O addresses.
The Multibus box presently contains four cards: the Multibus interface
card, two Systech cards jumpered together which handle the 16 RS232
ports, and a card which appeard to be only an interface to the tape
drive. We are trying to find answers to the following questions:

(1) How does one write to specific absolute Multibus memory or I/O
addresses from a user program?

(2) What address spaces are taken up by the other Multibus cards,
so we will know what addresses to avoid in designing our own cards?

Any help would be greatly appreciated.

                                         John Roberts
                                         roberts@nbs-vms  
------
------