🚀 go-pugleaf

I don't know if this helps but:
-----


			  A N N O U N C E M E N T


The next release of the "ISO Development Environment at NRTC" will be
available on 23 March 1987.  This release is called 

				 ISODE 2.0

This software supports the development of certain kinds of ISO/CCITT/ECMA
protocols and applications.  Here are the details:  

  - ISODE is not proprietary, but it is not in the public domain.  This was
    necessary to include a "hold harmless" clause in the release.  The upshot
    of all this is that anyone can get a copy of the release and do anything
    they want with it, but no one takes any responsibility whatsoever for any
    (mis)use.

  - ISODE runs on native 4.2BSD and SVR2 with an Excelan card.  It
    also runs on a AT&T 3B2 running SVR2 and the WIN TCP/IP package,
    native ROS (the Ridge Operating System), and HP-UX.  (Future
    releases will support VAX/VMS, PC-XENIX, and a variant of PC/IP.)  

  - Current modules include:
	TSAP	- ISO transport service (TP0 on top of TCP)
	SSAP	- ISO session service
	PSAP	- ASN.1 abstract syntax and transfer notation
	PEPY	- ASN.1 to internal datastructure facility
	PSAP2	- ISO presentation service
	AcSAP	- ISO association control service
	RtSAP	- ISO/CCITT reliable transfer service
	RoSAP	- ISO/CCITT/ECMA remote operations service

  - Although the ISODE is not "supported" per se, it does have a
    problem-reporting address, Bug-ISODE@NRTC.NORTHROP.COM.  Bug reports (and
    fixes) are welcome by the way.

  - The discussion group ISODE@NRTC.NORTHROP.COM is used as an open forum on
    ISODE.  Contact ISODE-Request@NRTC.NORTHROP.COM to be added to this list.

  - The primary documentation for this release consists of a User's
    Manual (approx 300 pages) and a set of UNIX manual pages.  The
    sources to the User's Manual are in LaTeX format.  In addition,
    there are a number of notes, papers, and presentations included in
    the documentation set, again in either LaTeX or SLiTeX format.


For more information, contact:  

        Northrop Research and Technology Center
        Attn: Automation Sciences Laboratory (0330/T30)
        One Research Park
        Palos Verdes Peninsula, CA  90274
	USA

        +1-213-544-5393

There are several ways to get a distribution:

    - DARPA/NSF Internet
    If you can FTP to the DARPA/NSF Internet, you can use anonymous FTP
    to louie.udel.edu [10.0.0.96] and retrieve the file portal/isode-2.tar.
    This is a 5MB tar image The file portal/isode-2.tar.Z is the tar
    image after being run through the compress program (approx. 2MB).
    

    - NIFTP
    If you run NIFTP over the public X.25 or over JANET, and are
    registered in the NRS at Salford, you can use NIFTP with username
    guest, and your own name as password, to access UK.AC.UCL.CS to
    retrieve the file <SRC>isode-2.tar.  This is a 5MB tar image The
    file <SRC>isode-2.tar.Z is the tar image after being run through the
    compress program (approx. 2MB).  


    - NORTH AMERICA 
    For mailings in NORTH AMERICA, send a check or invoice for $130 US
    dollars to:  

        Department of Electrical Engineering
	Attn: Prof. David J. Farber
	University of Delaware
	Newark, DE  19716
	USA

        +1-302-451-1163

    The tape will be written in tar format at 1600bpi.  Do not send
    tapes or envelopes.  Documentation is separately available for $20
    US dollars.  


    - EUROPE
    For mailings in EUROPE, send a cheque or invoice for 100 pounds
    sterling to:  

        Department of Computer Science
        Attn: Soren Sorenson
        University College
        Gower Street
        London, WC1E 6BT
        UK

	+44-1-387-7050  x3680

    The tape will be written in tar format at 1600bpi, and returned with
    a documentation set.  Do not send tapes or envelopes.  Documentation
    only is the same price.