Re: Sun-2 vs. Hayes when used for both dialin and dialout

Article View: mod.telecom

Article #229

#229

From: telecom
Date: Thu, 16 Jan 1986 16:43

17 lines
1162 bytes

Your problem is a very common one, that took me a while to figure out on
our Sun 2-170. To use it for both calling and out, youu must reconfigure
the kernal.

If you have a Standard Sun CPU Board:

	Edit your Kernal, and find a line like:

	device zs0 at mb0 csr 0xeec800 flags 0x3 priority 2

	and change 0x3 to 0x2 for ttya, to 0x1 for ttyb, to 0x0 for both.

If you have something else send me a note or 

check your administration manual under "Adding Hardware to your System"

					Jeff Kvam

Technical Details

Message-ID: <8601181904.AA09699@ucbvax.berkeley.edu>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!cbosgd!ihnp4!ucbvax!telecom

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!cbosgd!ihnp4!ucbvax!telecom
From: telecom@ucbvax.UUCP
Newsgroups: mod.telecom
Subject: Re: Sun-2 vs. Hayes when used for both dialin and dialout
Message-ID: <8601181904.AA09699@ucbvax.berkeley.edu>
Date: Thu, 16-Jan-86 11:43:18 EST
Article-I.D.: ucbvax.8601181904.AA09699
Posted: Thu Jan 16 11:43:18 1986
Date-Received: Sun, 19-Jan-86 05:30:26 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: Celerity Computing, San Diego, Ca.
Lines: 17
Approved: telecom@mit-xx.arpa