I've got a "coupling transformer"..

Article View: mod.telecom

Article #342

#342

From: Cent.Mbeck%OZ.AI.MIT.EDU
Date: Mon, 05 May 1986 03:43

16 lines
1181 bytes

..that has six (!) windings on it.  I've got the manufacturer's spec
sheet; this thing appears to be a Prem "SPT-126".  Okay.

The interconnect shown on the sheet has me confused.  I see where the
tip and ring leads get wired into the transformer.. but there are two
leads coming out on the primary side; one is labelled the "A" lead and
the other the "B" lead .

What is supposed to go there?  Should I short the leads together?  Is
there some kind of balancing or compensation network which should be
inserted?

Please reply directly - I'm not on the distribution list.

Thanks -
-------

Technical Details

Message-ID: <8605130358.AA15079@ucbvax.Berkeley.EDU>

Path: arc1-ca.pugleaf.net!utzoo!decvax!decwrl!ucbvax!XX.LCS.MIT.EDU!Cent.Mbeck%OZ.AI.MIT.EDU

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!decvax!decwrl!ucbvax!XX.LCS.MIT.EDU!Cent.Mbeck%OZ.AI.MIT.EDU
From: Cent.Mbeck%OZ.AI.MIT.EDU@XX.LCS.MIT.EDU.UUCP
Newsgroups: mod.telecom
Subject: I've got a "coupling transformer"..
Message-ID: <8605130358.AA15079@ucbvax.Berkeley.EDU>
Date: Sun, 4-May-86 23:43:06 EDT
Article-I.D.: ucbvax.8605130358.AA15079
Posted: Sun May  4 23:43:06 1986
Date-Received: Tue, 13-May-86 18:21:57 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 16
Approved: telecom@xx.lcs.mit.edu