Article View: mod.telecom
Article #772Q: reporting (or not) your hardware to the TELCO ?!]
From: CMP.WERNER
Date: Thu, 02 Apr 1987 04:29
Date: Thu, 02 Apr 1987 04:29
53 lines
3100 bytes
3100 bytes
I don't recall seeing this message make the digests. was it rejected by the
moderator or did it not arrive?
---------------
Date: Sat 21 Mar 87 04:53:52-CST
From: Werner Uhrig <CMP.WERNER@R20.UTEXAS.EDU>
Subject: Q: reporting (or not) your hardware to the TELCO ?!
To: telecom@R20.UTEXAS.EDU
In-Reply-To: Message of Fri 20 Mar 87 01:32:55-CST
Message-ID: <12288119033.25.CMP.WERNER@R20.UTEXAS.EDU>
Gary Wells <gary%percival%reed%tektronix.tek.com@RELAY.CS.NET> writes
in TELECOM Digest V6 #23 ...
> There are several methods used by the telco's for line testing. .....
> By knowing WHAT is hanging
> on the end of your cable, you can quickly tell the status of the pair AND the
> station. This is why the telco's fought so hard about registration. They
> really didn't care about the equipment, they just need to know what it
> "looks" like, for trouble isolation purposes.
HMMMM, it's been years now that I've taken the trouble to tell SWB about the
latest changes in equipment that I've connected at my end - mainly, because
it changes so often and because I'm under the impression that they don't really
care to know; or, at least, don't do anything with the information that I
give them about my latest set of hardware (besides, it often changes on
a daily basis; what with all these new modems, answering machines, phones and
other gadgets to test and play with :-)
Now, what I'd like to know is the following:
1) Can someone tell me what the phone company *SHOULD* be doing with the data
describing my hardware?
2) Is there something that I should *INSIST* that SWB do in response to me
reporting what I have connected?
3) Is there some way that I can test that they *ACTUALLY DID* what needed to
be done at their end?
4) Can not reporting my latest set of hardware lead to *DEGRADING* in line
quality somehow? for example, could this lead to degraded line quality
for data communications using a modem (especially at 2400 baud)? or to
another phenomenon, such as "not all connected phones ring during an
incoming call"?
I guess, what I really need is a pointer to a book which really all that I may
ever want to know about telephones and data-communications in a lingo I can
understand and make sense of (i.e. don't require the background and knowledge
of the lingo of a telecommunications engineer). Please, *DO* give pointers !!
---Werner
-------
Technical Details
Message-ID:
<12291194708.5.CMP.WERNER@R20.UTEXAS.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!husc6!panda!genrad!decvax!ucbvax!R20.UTEXAS.EDU!CMP.WERNERShow Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!husc6!panda!genrad!decvax!ucbvax!R20.UTEXAS.EDU!CMP.WERNER From: CMP.WERNER@R20.UTEXAS.EDU.UUCP Newsgroups: mod.telecom Subject: Q: reporting (or not) your hardware to the TELCO ?!] Message-ID: <12291194708.5.CMP.WERNER@R20.UTEXAS.EDU> Date: Wed, 1-Apr-87 23:29:03 EST Article-I.D.: R20.12291194708.5.CMP.WERNER Posted: Wed Apr 1 23:29:03 1987 Date-Received: Sat, 4-Apr-87 17:43:41 EST Sender: daemon@ucbvax.BERKELEY.EDU Distribution: world Organization: The ARPA Internet Lines: 53 Approved: telecom@xx.lcs.mit.edu