Article View: mod.telecom
Article #784Re: Submission for mod.telecom (FCC Registration)
From: howard
Date: Mon, 06 Apr 1987 13:55
Date: Mon, 06 Apr 1987 13:55
13 lines
1253 bytes
1253 bytes
One minor point (minor until it gets you): dial modems, especially the higher speed ones, may not work properly because the network interface device has resistors set for voice use, not data. It is worth letting your telco know you are running higher speed data, because your network interface should then be configured to give you better signal to noise ratios, not important for voice. If they're going to charge more for data access, do this only after you have unacceptable problems. Your problems, however, often are in the jack, not the local loop.
Technical Details
Message-ID:
<195@cos.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!ames!ucbcad!ucbvax!cos.UUCP!howardReferences:
<8704051910.AA03616@seismo.CSS.GOV>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!ames!ucbcad!ucbvax!cos.UUCP!howard From: howard@cos.UUCP.UUCP Newsgroups: mod.telecom Subject: Re: Submission for mod.telecom (FCC Registration) Message-ID: <195@cos.COM> Date: Mon, 6-Apr-87 08:55:58 EST Article-I.D.: cos.195 Posted: Mon Apr 6 08:55:58 1987 Date-Received: Sat, 11-Apr-87 11:52:48 EST References: <8704051910.AA03616@seismo.CSS.GOV> Sender: daemon@ucbvax.BERKELEY.EDU Distribution: world Organization: Corporation for Open Systems, McLean, VA Lines: 13 Approved: telecom@xx.lcs.mit.edu Summary: Connecting dial modems--use correct jack