Re: Re: Oil burning and piston rings

Article View: net.auto.tech

Article #152

#152

From: bcking
Date: Fri, 22 Nov 1985 23:27

14 lines
1103 bytes

** wring job **

One other caution.  Make sure the rod bolts clear the piston bore
when you're pounding them out!  Pistons are in there pretty tight
and sometimes it doesn't go any further, but you just keep pounding
until it comes out, only to find that a rod bolt hooked the bottom
of the bore and took a big chunk out of the block.  Be careful.

R.M. Mottola
Cyborg Corp.
Newton, MA.

(Response posted for me by a friend, but not for long)

Technical Details

Message-ID: <102000011@inmet.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!qantel!lll-crg!seismo!harvard!bbnccv!inmet!bcking

References: <324@steinmetz.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: $Revision: 1.6.2.16 $; site inmet.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!qantel!lll-crg!seismo!harvard!bbnccv!inmet!bcking
From: bcking@inmet.UUCP
Newsgroups: net.auto.tech
Subject: Re: Re: Oil burning and piston rings
Message-ID: <102000011@inmet.UUCP>
Date: Fri, 22-Nov-85 18:27:00 EST
Article-I.D.: inmet.102000011
Posted: Fri Nov 22 18:27:00 1985
Date-Received: Thu, 28-Nov-85 03:46:11 EST
References: <324@steinmetz.UUCP>
Lines: 14
Nf-ID: #R:steinmetz:-32400:inmet:102000011:000:444
Nf-From: inmet!bcking    Nov 22 18:27:00 1985

Reply to Parent Message