🚀 go-pugleaf

In article <324@tekig4.UUCP> johnr@tekig4.UUCP (John Rettig) writes:
><>
>I recently changed the brake pads on the vented front
>disks on my (Mitsubishi) Dodge D-50.  ...
>
>Up until then, I never got squeals.  With the new pads
>in place, the front disks immediatly started squealing
> ...
>I have tried washing with brake parts cleaner and IPA,
>to no avail.
>
>Has anyone had a similar experience and solved it? 

The single most common cause of brakes squealing after being
relined has nothing to do with the composition of the brake
pads or shoes used.  The problem occurs both with disk and with drum brakes
and is caused by a lack of lubrication.  All metal bearing surfaces
should be LIGHTLY! greased with some high temperature grease.
The best stuff I ever saw was some speacially formulated stuff 
from GM but I have never seen this commercially available.  Moly
grease is fine, so is lithium or white grease.  
Don't use axel grease or that brown wheel bearing
grease; it can't take the heat and will bleed onto the friction
surfaces.  Washing the parts in brake cleaner can only make the
problem worse by removing any vestige of lubrication.
The lubrication should be applied to the little bearing pads on 
the backing plate of drum brakes and to the edged of the pads
the bearing surfaces o