Re: Hillman Huskey Parts

Article View: net.auto.tech

Article #235

#235

From: George Robbins
Date: Sun, 08 Dec 1985 21:56

22 lines
1617 bytes

Sorry, direct mail wouldn't seem to go to your return address...

Received: by scgvaxd.UUCP (4.12/4.7)
From: ihnp4!scgvaxd!MAILER-DAEMON (Mail Delivery Subsystem)
Subject: Returned mail: User unknown
550 jimmmy... User unknown
Subject: Condenser Compatability

Hi Jim:

	The condenser associated with the points in a distributor is not a
very critical component.  Any part intended for this application that is
mechanically compatable should work fine.

	Also, the *only* way the condenser can keep the engine from running is
if it is shorted out.  An open condenser will cause excessive erosion and metal
transfer on the points, but the motor should still run.  There is not much
middle ground, except a part that only shorts out when it gets hot.
-- 
George Robbins			uucp:	{unirot|tapa}!grr
P.O. Box 177
Lincoln U, PA  19352	[The ideas herein are not responsible to themselves!]

Technical Details

Message-ID: <231@unirot.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!bonnie!akgua!gatech!ut-sally!seismo!caip!unirot!grr

References: <2922@vax4.fluke.UUCP> <474@scgvaxd.UUCP> <829@hou2d.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site unirot.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!bonnie!akgua!gatech!ut-sally!seismo!caip!unirot!grr
From: grr@unirot.UUCP (George Robbins)
Newsgroups: net.auto.tech
Subject: Re: Hillman Huskey Parts
Message-ID: <231@unirot.UUCP>
Date: Sun, 8-Dec-85 16:56:36 EST
Article-I.D.: unirot.231
Posted: Sun Dec  8 16:56:36 1985
Date-Received: Tue, 10-Dec-85 05:28:00 EST
References: <2922@vax4.fluke.UUCP> <474@scgvaxd.UUCP> <829@hou2d.UUCP>
Reply-To: grr@unirot.UUCP (George Robbins)
Organization: The Soup Kitchen, Piscataway NJ
Lines: 22
Keywords: 1953 Hillman
Summary: any condenser should work

Reply to Parent Message