Article View: net.auto.tech
Article #323Re: Laquer vs. Enamel
From: Whalen
Date: Mon, 23 Dec 1985 13:29
Date: Mon, 23 Dec 1985 13:29
14 lines
1288 bytes
1288 bytes
> In article <105200001@haddock.UUCP> marc@haddock.UUCP writes: > >Remember that it is strongly recommended that unless you are going to strip > >all of the paint off the car that you paint over the top of it with whatever > >is already there (ie. enamel on enamel, laquor on laquor). > > You can paint enamel over laquer without any problems, unfortunately > the thinners in laquer will cause enamel to lift; hence you cannot paint > over enamel with laquer unless you use a sealant (check with your auto-paint You can paint over acrylic enamel after it has cured or if has been factory oven-baked. I have done so many times. Gary Whalen Bell Labs Naperville, IL
Technical Details
Message-ID:
<720@ihu1h.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!ihnp4!ihu1h!garywReferences:
<1287@ihuxi.UUCP> <105200001@haddock.UUCP> <2840@watvlsi.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84 exptools; site ihu1h.UUCP Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!ihnp4!ihu1h!garyw From: garyw@ihu1h.UUCP (Whalen) Newsgroups: net.auto.tech Subject: Re: Laquer vs. Enamel Message-ID: <720@ihu1h.UUCP> Date: Mon, 23-Dec-85 08:29:55 EST Article-I.D.: ihu1h.720 Posted: Mon Dec 23 08:29:55 1985 Date-Received: Wed, 25-Dec-85 01:02:57 EST References: <1287@ihuxi.UUCP> <105200001@haddock.UUCP> <2840@watvlsi.UUCP> Organization: AT&T Bell Laboratories Lines: 14