pre fully synchro'd gearbox owners tip

Article View: net.auto.tech

Article #652

#652

From: Miles Spellman
Date: Fri, 31 Jan 1986 23:16

9 lines
1138 bytes

A tip for owners of pre reverse gear synchromesh autos:

After a couple of years of depressing the clutch and waiting for 5 seconds
before engaging reverse gear in my 71 saab sonett to avoid the gears
grinding I found out about the following method. If you start to engage
one of the synchro'd forward gears just enough to touch the syncrhos
this will stop the reverse gear shaft rotating and let you go into
reverse immediately saving about four seconds each time and minimizing
wear on those gears. This has been tested and works on old MG's too.

Technical Details

Message-ID: <9700001@hplabsb.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!decwrl!pyramid!hplabsb!spellman

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles hp 2.0 03/25/85; site hplabsb.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!decwrl!pyramid!hplabsb!spellman
From: spellman@hplabsb.UUCP (Miles Spellman)
Newsgroups: net.auto.tech
Subject: pre fully synchro'd gearbox owners tip
Message-ID: <9700001@hplabsb.UUCP>
Date: Fri, 31-Jan-86 18:16:00 EST
Article-I.D.: hplabsb.9700001
Posted: Fri Jan 31 18:16:00 1986
Date-Received: Sat, 1-Feb-86 20:50:25 EST
Organization: Hewlett-Packard Laboratories - Palo Alto, CA
Lines: 9