🚀 go-pugleaf

In article <2270@ucf-cs.UUCP> tech@ucf-cs.UUCP (Electronic technician) writes:
>
>
>    does anybody out there know an easy way to tell if the
>    water in my oil comes from a cracked block, cracked head,
>    or a blown head gasket? Of course I suppose it's possible
>    that something else could be causing this, but I don't know 
>    what. 
>    Tony Travaglini {decvax,akgua}!ucf-cs!tech

 I would suggest doing a compression test of all cylinders.  A
blown head gasket from the cylinder to the water jacket will show
little to no compression especially when the engine is turned over
slower than the normal speed for a compression check.

Also I believe that almost all water/oil leaks are caused by head
related damage so a "gamble" would be in your favor to pull the head
and look.
			Bill Landsborough

----

"Love is patient and kind; love is not jealous or boastful; it is not 
arrogant or rude... Love bears all things, believes all things, hopes all
things, endures all things."   1 Corinthians 13:4-7