Kermit-32 problem under VMS 4.1

Article View: net.decus

Article #139

#139

From: Paul H. Wong
Date: Wed, 01 May 1985 18:44

11 lines
940 bytes

>	%KERMIT32-F-BADPARAM, bad parameter value

What version of KERMIT-32 are you using?  V3.0.051 exhibited this problem,
but there is now a newer version - V3.1.066 that supposedly fixed quite  a 
few problems.  You might want to try it.

- Paul

ARPA: 	PWong%PIXEL.DEC@decwrl.arpa
USENET:	{allegra|decvax|ihnp4|ucbvax}!decwrl!dec-rhea!dec-pixel!pwong

Technical Details

Message-ID: <1949@decwrl.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!linus!philabs!cmcl2!seismo!harvard!talcott!panda!genrad!decvax!decwrl!dec-rhea!dec-pixel!pwong

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site decwrl.UUCP
Path: arc1-ca.pugleaf.net!utzoo!linus!philabs!cmcl2!seismo!harvard!talcott!panda!genrad!decvax!decwrl!dec-rhea!dec-pixel!pwong
From: pwong@pixel.DEC (Paul H. Wong)
Newsgroups: net.decus
Subject: Kermit-32 problem under VMS 4.1
Message-ID: <1949@decwrl.UUCP>
Date: Wed, 1-May-85 14:44:08 EDT
Article-I.D.: decwrl.1949
Posted: Wed May  1 14:44:08 1985
Date-Received: Sat, 4-May-85 06:28:24 EDT
Sender: daemon@decwrl.UUCP
Organization: DEC Engineering Network
Lines: 12