Article View: net.eunice
Article #130Re: Disabling logins on a port?
From: Jonathan Shapiro
Date: Wed, 31 Oct 1984 06:09
Date: Wed, 31 Oct 1984 06:09
14 lines
1111 bytes
1111 bytes
[Aren't you hungry...?] You can't disable logins on a port under VMS. We had a similar problem using Novation smartcats, and eventually replaced those with smartmodems. In any case, the gist of the problem is that you a) don't have /HANGUP set on the modem line on the VAX w/ VMS b) don't have both carrier detect and DTR wired. If these are wired correctly the VAX will hang up after a bad login, which eliminates the ping pong condition. It may take a few trys, but it sounds like the problem is the modem cable. Jonathan S. Shapiro
Technical Details
Message-ID:
<591@sjuvax.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!allegra!sjuvax!jssReferences:
<1384@sdcrdcf.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.1 6/24/83; site sjuvax.UUCP Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!allegra!sjuvax!jss From: jss@sjuvax.UUCP (Jonathan Shapiro) Newsgroups: net.eunice Subject: Re: Disabling logins on a port? Message-ID: <591@sjuvax.UUCP> Date: Wed, 31-Oct-84 01:09:55 EST Article-I.D.: sjuvax.591 Posted: Wed Oct 31 01:09:55 1984 Date-Received: Thu, 1-Nov-84 04:43:47 EST References: <1384@sdcrdcf.UUCP> Organization: Saint Josephs Univ. Phila., Pa. Lines: 14