Problems with interlan NI 1010A Ethernet controller

Article View: net.lan

Article #5

From: Ron Sheen
Date: Wed, 09 Oct 1985 22:55

14 lines
1312 bytes

I am posting this for a friend who does not have access to the
net, please reply directly to seismo!uw70!steve
--------------------------------------------------------------

Our PDP 11/70 is hanging in a pause state whenever the Harvard/CSS
2.9 is booted and our Interlan NI 1010A Ethernet controller board
is on the UNIBUS.  This happens if the device driver is configured
into the system or not.  Changing the CSR address of the device did
not change the symptoms.  The kernel boots and runs fine if the device
is not in the UNIBUS.  There are no problems running 2.8 with the
board installed (2.8 does not use the board, but this shows there are
not UNIBUS problems).

Any suggestions will be apreciated.

Technical Details

Message-ID: <395@unrvax.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!linus!philabs!cmcl2!seismo!utah-cs!utah-gr!stride!unrvax!ron

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site unrvax.UUCP
Path: arc1-ca.pugleaf.net!utzoo!linus!philabs!cmcl2!seismo!utah-cs!utah-gr!stride!unrvax!ron
From: ron@unrvax.UUCP (Ron Sheen)
Newsgroups: net.lan,net.bugs.2bsd
Subject: Problems with interlan NI 1010A Ethernet controller
Message-ID: <395@unrvax.UUCP>
Date: Wed, 9-Oct-85 18:55:05 EDT
Article-I.D.: unrvax.395
Posted: Wed Oct  9 18:55:05 1985
Date-Received: Fri, 11-Oct-85 08:30:27 EDT
Reply-To: ron@unrvax.UUCP (Ron Sheen)
Organization: Univ. of Nev., Reno-Seismology
Lines: 14