Trouble with Excelan 201 board (TCP/IP) on Plexus P25

Article View: net.lan

Article #549

#549

From: M. Lampell
Date: Tue, 08 Jan 1985 20:00

16 lines
1161 bytes

We are attempting to install an Excelan 201 Ethernet board on our
Plexus P25 computer (Multibus, Z8000-based, System III UNIX).
We have compiled all of the Excelan software with few  problems,
and have a working /unix. However, when we boot the system with
the Excelan board in the  Multibus, the system does not boot,
and only generates trap messages.
We have little documentation on the Multibus cage in our  P25.

Anybody have experience with the Plexus/Excelan combination?

		Please send replies to Maurice Lampell
				     ...ihnp4!nvuxd!ml

Thanks.
-- 
From the desk of M. Lampell x6051   ...ihnp4!houxd!ml

Technical Details

Message-ID: <119@nvuxd.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!gamma!pyuxww!pyuxv!nvuxr!nvuxd!ml

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site nvuxd.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!gamma!pyuxww!pyuxv!nvuxr!nvuxd!ml
From: ml@nvuxd.UUCP (M. Lampell)
Newsgroups: net.lan
Subject: Trouble with Excelan 201 board (TCP/IP) on Plexus P25
Message-ID: <119@nvuxd.UUCP>
Date: Tue, 8-Jan-85 15:00:00 EST
Article-I.D.: nvuxd.119
Posted: Tue Jan  8 15:00:00 1985
Date-Received: Wed, 9-Jan-85 06:21:18 EST
Organization: Bell Communications Research
Lines: 16