X.25 for IBM PC?

Thread View: net.lan

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Derek Zahn Thu, 17 Oct 1985 18:44

#14

Author: Derek Zahn
Date: Thu, 17 Oct 1985 18:44

10 lines
979 bytes

We are looking for X.25 Level 2 (HDLC) or levels 2 and 3 board-level 
implementations for the PC/AT.  The protocol will be used over a 9.6 KBPS
or 56 KBPS line connecting two ATs.

If anyone has any information about this, it would be greatly appreciated.
Please resopnd to fuchs%pucc@WISCVM.ARPA.
-- 
Derek Zahn @ wisconsin
...!{allegra,heurikon,ihnp4,seismo,sfwin,ucbvax,uwm-evax}!uwvax!derek
derek@wisc-rsch.arpa

Re: X.25 for IBM PC?

#17

Author: Brian Bertan
Date: Mon, 21 Oct 1985 14:18

22 lines
1443 bytes

> We are looking for X.25 Level 2 (HDLC) or levels 2 and 3 board-level 
> implementations for the PC/AT.  The protocol will be used over a 9.6 KBPS
> or 56 KBPS line connecting two ATs.


Western Digital has a board level product implementing X.25 through level 3,
avialble for the IBM-PC family.  It is based on their WD2511 X.25
microcontroller.  I have not seen the board level product, but from what I've
seen of the WD2511 it should meet your needs.  Their address is:

Western Digital
2445 McCabe Way
Irivine, CA 92714
(714) 863-0102

NOTE:  I Have NO connection with Western Digital, and these opinions are
       mine alone.

                                                  Brian Bertan
						  Philips Labs
						  Briarcliff Manor, NY
{allegra | decvax | seismo}!philabs!brb           (914) 945-6309

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads