Re: Codenoll repeaters

Thread View: net.lan

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Milo Medin Thu, 05 Dec 1985 17:27

#50

Author: Milo Medin
Date: Thu, 05 Dec 1985 17:27

14 lines
1298 bytes

This is a follow-up on my earlier note regarding Codenoll
fiberoptic repeaters.  We had been experiencing high collision rates,
which we attributed to the Codenoll repeaters, and so requested help
from Codenoll. They (Codenoll) responded by sending out an engineer who
helped trace the problem to our ethernet cable.  There was 
a kink in the cable and the terminating load was too close to
the transciever (ie out of ethernet spec).  Once these issues were resolved,
the Codenoll repeaters were put back online and the link came up.
Since then, we had Codenoll come out and get a second link up, and
that too is now performing flawlessly. 


					Milo Medin
					NASA Ames

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads