Re: Wanted: Include message patch for MS-DOS Turbo Pascal

Thread View: net.lang.pascal

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by James J. Krause Thu, 10 Oct 1985 02:16

#212

Author: James J. Krause
Date: Thu, 10 Oct 1985 02:16

50 lines
1911 bytes

Dave Beyerl (ihuxk!db21) writes:

> ...an article was posted that described a
> patch to the CP/M versions of Turbo Pascal for bypassing the
> include messages prompt....  I was
> wondering if anyone has determined if MS-DOS Turbo Pascal, ver 3,
> can be patched in similar fashion....

Yep.  I've got the patches for verions 2.0 and 3.0:

(XXXX stands for 4 hex digits, whose actual value is not of importance.)

Turbo Pascal Version 2.0
------------------------

A>DEBUG TURBO.COM
-A 29ED
XXXX:29ED MOV BYTE PTR [023D],0B
XXXX:29F2 NOP
XXXX:29F3 NOP
XXXX:29F4 NOP
XXXX:29F5 <ENTER>
-W
-Q

Turbo Pascal Version 3.0
------------------------

A>DEBUG TURBO.COM
-A 2EB7
XXXX:2EB7 MOV BYTE PTR [0348],0B
XXXX:2EBC NOP
XXXX:2EBD NOP
XXXX:2EBE NOP
XXXX:2EBF <ENTER>
-W
-Q

Note that these patches will always _include_ the error messages file.
I'm not sure of the alterations required to _not_ include them.
I've double- and triple-checked for typos, but of course, don't do this
to your only copy of Turbo.  I've used the patch for version 3 on the
PC-DOS & Compat. release of Turbo, and it works; I haven't had the
occasion to try out the v. 2 patch, but it's from the same source
(PC Magazine, August 6, 1985, p. 217).

				James
			(...!ihnp4!stolaf!krausej)

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads